In the process of injection molding, we should carefully look at the following four points

In fact, injection mold is a procedure for producing plastic materials, but some attention should be paid to in the injection molding process, because carelessness will deform the materials and make them unusable. And the mold has the nickname of “mother of industry”. It can be seen how important the mold is. Here are four points to pay attention to in injection molding.

1. Good wear resistance. The gloss and accuracy of the surface of injection molded parts are directly related to the wear resistance of the surface of the injection mold cavity. Especially when some plastics add glass fiber, inorganic filler and some pigments, it flows at idle speed in the flow channel and cavity together with the plastic melt. The friction on the cavity surface is very large. If the material is not wear-resistant, it will wear quickly and the quality of plastic parts will be damaged.

2. The dimensional stability of injection molding is good, and the temperature of injection mold cavity should reach more than 300 ℃. Try to use tempered materials, otherwise it is easy to change the structure slightly, which can also lead to the change of size.

Easily machined mold parts are mostly made of metal materials, and some structures and shapes are still complex. In order to shorten the production cycle and improve efficiency, the die material must be easy to process into the shape and accuracy required by the drawing.

3. Good polishing performance of injection molded parts usually requires good gloss and surface state, so the roughness of the cavity surface is very small, so the cavity surface must be processed, such as polishing, grinding, etc. Therefore, the selected steel should not contain coarse impurities and pores.

4. The process of heat treatment is to improve the service performance of materials. Therefore, many molds will have the process of heat treatment, which may change the size of molds. Therefore, it is preferable to use Machinable pre hardening steel.



About Huizhou Dj Molding Co., Ltd

Dj Mold is a China mold maker of plastic molds- injection mold, die casting moulds, plastic blow molding, rotational molding, medical plastic injection molding, two shot plastic injection molding, insert molding, overmolding, metal injection molding, micro injection molding, powder injection molding, ceramic injection molding, liquid injection molding, husky injection molding, household mold, casting mold, die mold tool, custom molds, china moulds, rapid prototyping tooling, plastic prototyping tooling, punch press tooling, die and tooling for mobile/ cell phone parts, automotive parts, vacuum cleaners, rechargeable tools, telephones, copiers, computers, multimedia speakers, and many other electronic products and household appliances. And also a plastic product manufacturer, mold manufacturer China– plastic parts, plastic water tank, plastic balls, plastic containers, plastic buckle, plastic anchor, plastic hanger, plastic spoon, plastic pipe fitting, plastic tumble, plastic tableware, plastic cups, plastic bottles, plastic tray, plastic cosmetic container, plastic case, plastic food container, plastic chairs, plastic caps, plastic cap closure, plastic tubes, plastic water pipes, plastic knobs, plastic tubing, plastic utility boxes, plastic racks and so on.

Person: James Yuan
Company: Huizhou Dj Molding Company Limited
Add:  LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong Province, China
Tel: 86-752-6682869
Email: [email protected]


Share this post