Precautions before plastic mould test

In JasonMould, after completing a new set of plastic moulds, test moulds are an indispensable part before mass injection moulding. The quality of the test results will directly affect the follow-up production of the factory. Therefore, in order to promote the large-scale production of plastic mould products, it is necessary to follow reasonable operation steps and record the technical parameters in the process of test.

 

Notices for plastic mould before test:

 

Whether the mould has been assembled or not. Secondly, attention should be paid to the gate position and feeding mode of the plastic mould, as well as gate size and cavity size, so as to select the appropriate injection pressure, injection speed and material consumption. After preheating the plastic mould, check carefully whether all the joints of the mould are too hard, and then confirm the bonding line and exhaust gas.

 

 

The main steps of plastic mould test are as follows:

 

  1. Check whether the material in the barrel is correct for drying. If different materials are used for testing and production, there may be different results.

 

  1. Cleaning material pipes, to thoroughly clean material pipes, prevent material mixing or debris into plastic moulds.

 

  1. Adjusting injection pressure and injection quantity.

 

  1. Reasonable adjustment to reduce the total processing cycle;

 

  1. Measure continuous samples and record their important parameters.

 

  1. Observe whether the sample meets the customer’s requirements for product accuracy and appearance. If it meets the customer’s requirements, it shows that the test is successful. If not, it is necessary to analyze the problems and solve them. Until the production of customer satisfaction samples.

 

About JasonMould Industrial Company Limited

Jasonmould is a China mold maker of plastic molds- injection mold, die casting moulds, plastic blow molding, rotational molding, medical plastic injection molding, two shot plastic injection molding, insert molding, overmolding, metal injection molding, micro injection molding, powder injection molding, ceramic injection molding, liquid injection molding, husky injection molding, household mold, casting mold, die mold tool, custom molds, china moulds, rapid prototyping tooling, plastic prototyping tooling, punch press tooling, die and tooling for mobile/ cell phone parts, automotive parts, vacuum cleaners, rechargeable tools, telephones, copiers, computers, multimedia speakers, and many other electronic products and household appliances. And also a plastic product manufacturer, mold manufacturer China– plastic parts, plastic water tank, plastic balls, plastic containers, plastic buckle, plastic anchor, plastic hanger, plastic spoon, plastic pipe fitting, plastic tumble, plastic tableware, plastic cups, plastic bottles, plastic tray, plastic cosmetic container, plastic case, plastic food container, plastic chairs, plastic caps, plastic cap closure, plastic tubes, plastic water pipes, plastic knobs, plastic tubing, plastic utility boxes, plastic racks and so on.

Contact:
Person: James Yuan
Company: JasonMould Industrial Company Limited
Add:  LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong Province, China
Tel: 86-752-6682869
Email: james@jasonmolding.com

Site: https://www.jasonmolding.com/custom-injection-molding/

Share this post