Snabb prototypframställning is a process that uses computer aided tools and techniques such as 3D printing and stereo lithography to create physical product models for production tooling and analysis. Processen kan vara till stor hjälp för produktdesigners, komponentleverantörer och även tillverkare och kommer med en rad fördelar, som att spara tid, minska kostnaderna, sänkningsfel etc. It helps you build and test ideas for product development so that you know whether your idea can be turned into a good product in an efficient manner. Given below are 5 tips to help you build rapid prototyping models successfully.
1.Manage complexity
Faktiskt, the aim of this approach is to test the impact of different models on their performance. If there are lots of variables, you may want to be careful when combing them in the same breadboard. Med rimlig design, if you have some difficult models, you should break them into different builds isolating complex systems. Then you can join them to simulate the actual product.
2.Test parameters
The role of rapid prototyping is not limited to finding out whether an idea can work or not. Som en sakfråga, a good breadboard lets you know the variables that allows the process to work. What you need to do is design the system based on the variables that you think can have a great impact on the performance. And don’t forget to test.
3.Go for speed
At first, it’s not a good idea to get the perfect parts. Just go for what is good enough. What you need to do is get the maximum number of off-the-shelf parts. Faktiskt, it’s faster, cheaper and gives you the freedom to change the parts when required. Om möjligt, you may want to go for items with short lead-times and variety.
4.Critical parts
When using off-the-shelf components, you will find custom pieces as well. Fabricating these pieces yourself is also a good idea. Faktiskt, this is the fastest way. You can also tweak them as you find out that your initial design was not the best one. For these parts, using rapid prototyping methods is not a good idea. At this phase, you don’t need to make custom injection parts, especially if rapid prototyping components get you what you want.
5.Robustness
As far as rapid prototyping goes, nothing is worse than ignoring something that is part of your learning process. If you think that you may need a stronger component, you should take steps to make it happen. Vid det här laget, you should not worry about cost, design or simplicity. You can take care of that later on.
Ökningen i process och hastighet kan få tillbaka kostnaden för hela systemet på bara några månader JasonMould Industrial Company Limited:
JasonMould är en av de bästa tillverkare av formsprutning av plast som erbjuder fantastiska tjänster till sina kunder när det gäller tillverkning av avancerade formverktyg. De exporterar sina verktyg till olika delar av världen och har blivit ett av de mest kända namnen i industrisektorn.
Förfrågan Kontakt:
Kontaktperson: James Yuan
Företagsnamn: JasonMould Industrial Company Limited
Adress: LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong-provinsen, Kina
Telefon: 86-752-6682869
E-post: [email protected]
Hemsida: https://www.jasonmolding.com
