Sedan mänskligheten gick in i industrisamhället, produktionen av alla typer av produkter har blivit av med manuellt arbete. Automatiserad maskintillverkning har blivit populär i alla samhällsskikt, och tillverkning av plastprodukter är inget undantag. Nu för tiden, Plastprodukter bearbetas av formsprutor med formsprutningsmaskiner, sådana som är vanliga i vårt dagliga liv. Alla typer av hushållsapparater och digitala produkter bearbetas genom formsprutning. How is a complete plastic product poruduced in the injection molding machine?
- Heating and preplasticization
Driven by the transmission system, the screw conveys the material from the hopper forward and compacts it. Under the combined action of shearing and friction of the heater, screw and barrel outside the barrel, the material gradually melts. A certain amount of molten plastic has accumulated at the head of the barrel. Under the pressure of the melt, the screw slowly recedes. The distance of retreat depends on the amount of injection required by the metering device at one time. When the predetermined injection amount is reached, the screw stops rotating and retreats.
- Clamping and locking
The clamping mechanism promotes the clamping and locking of the moving part of the mould and the moving part of the mould installed on the moving template, so as to ensure that sufficient clamping force can be provided for the clamping of the mold during the forming process.
- Injection device forward
When the clamping is completed, the whole injection seat is pushed forward to make the injector nozzle fully fit with the main runner of the mould.
- Injectand pressure keeping
After the clamping die and the nozzle are fully fitted to the die, the injection cylinder enters the high-pressure oil, pushes the screw forward relative to the barrel, injects the melt accumulated at the head of the barrel with sufficient pressure into the cavity of the die, and shrinks the plastic volume due to the decrease of temperature. In order to ensure the compactness, dimensional accuracy and mechanical properties of the plastic parts, det är nödvändigt. Pressure is maintained on the melt in the die cavity to supplement the material.
- Pressure relief
When the melt at the gate of the die freezes, the pressure can be relieved.
- Withdrawal of injection device
Generellt, after pressure relief, the screw can rotate and retreat to complete the next feeding and pre-plasticizing process.
- Openmoldand eject plastic parts
After cooling and finalizing the plastic parts in the mold cavity, the clamping mechanism opens the mould and pushes out the plastic parts in the mould.
Since then, a complete plastic product has been completed, självklart, most plastic parts will need to be sprayed, screen printing, bronzing, radium carving and other auxiliary processes, and then assembled with other products, and finally form a complete product, which will ultimately reach the hands of consumers.
JasonMould Industrial Company Limited, etablerad i 2010, är en ledande tillverkare av formsprutning av plast i Kina. JasonMould specialiserar sig på tillverkning av plastmögel för hushållsapparater, medicinsk utrustning, elektronisk utrustning, säkerhetsutrustning samt övervakningssystem.
Företaget har över 15000 kvadratmeter fabrik. Med plastinjektionsverktygsavdelningar med olika maskiner och expertis, JasonMould erbjuder verktyg från små och precisa mobiltelefondelar till så stora som bildelar. Våra verktyg exporteras främst till U.S.A., Europa, Japan och Storbritannien. JasonMoulds diversifieringsstrategi och full service har vunnit komplimanger från kunder över hela världen.
Vårt uppdrag är att erbjuda våra kunder högkvalitativa formprodukter och tjänster. Vi strävar efter att överträffa våra kunders förväntningar på prissättning, kvalitet och leverans i tid. För att uppnå vårt uppdrag, JasonMould:
- Förbinder sig att ständigt förbättra medarbetarnas kompetens och effektivitet,
- Ger våra anställda en ren och säker arbetsmiljö,
- Uppgraderar maskinteknik och supportutrustning genom ett strikt underhållsprogram, och
- Upprätthåller kundernas verktyg till sin högsta prestanda
För mer om anpassad tillverkare av plastgjutningsprodukter,besök https://www.jasonmolding.com/
Förfrågan Kontakt:
Kontaktperson: James Yuan
Företagsnamn: JasonMould Industrial Company Limited
Adress: LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong-provinsen, Kina
Telefon: 86-752-6682869
E-post: [email protected]
Hemsida: https://www.jasonmolding.com