Tag - china plastic injection molding

Design and adjust the machine to solve the surface shrinkage of mold plastic products!

We analyzed the following reasons for the surface shrinkage of the customer’s mold plastic products. At the same time, our injection molding technician carefully sorted out the solutions for your reference:
1. The wall thickness of the mold plastic product itself is too thick. This is because the product design is not processed according to the uniform wall thickness. The solution is to modify the product design and repair the mold.
2. The temperature is too high during forming.
The glue thickness […]

What should we pay attention to when TPE plastic injection molding?

What should we pay attention to when TPE plastic injection molding?
1. TPE plastic injection molding in the process of injection molding, the process and appearance of raw materials need to be checked before TPE molding. Dry the raw materials and determine the water content. Under the condition of high temperature, the moisture content of TPE raw materials is required to be less than 5%, or even 2% ~ 3%. Therefore, vacuum drying oven is commonly used to dry at […]

The choice of mold materials for Texture is very different

In order to achieve a better appearance effect of the product, the profile will be sun textured during mold processing. As we mentioned earlier, in some application scenarios of sun shading process, different mold materials also have very different effects on sun shading.
 
Generally, injection mold factories mostly choose NAK80 SKD61 8407 S136 and other profiles. The reason for choosing these profiles is that their processing effect will be better.
 
Dj Mold reminds you that the inclination of different sun lines […]

Injection mold factory teaches you how to solve the flash of injection molding products

The flash is essentially the excess left on the product after cooling in the gap where the plastic material enters the matching part of the mold. This is a problem that many injection mold factories will encounter. To solve the problem of flash is very simple, that is to control not to let the melt enter the mold fit gap. So how to solve it?
 
(1) Equipment
In some injection mold factories, the clamping force of machines is insufficient, which is […]

How do general injection molding factories solve the problem of product pitting?

Many technicians of injection molding products factories will find that sometimes there are many pits on the surface of injection molded products when plastic products are processed and injected. Different from the impurity problem of black spots, pitting mainly produces many pits on the product surface.
It has a great impact on the appearance. The inspectors of the injection molding product factory should know that it is difficult for customers to accept such products with appearance problems.
We consulted technician and […]

Silicone products foundry keeping up with the times is qualified

There are thousands of silicone products on the market every year, and only a few are really favored by consumers. As a foundry of silicone products, only by keeping up with the times can we accurately control the market demand and make products that fit the preferences of consumers.
The popular trend of a product refers to the standard or potential style on which a certain era, a certain feature, a certain function, a certain group of people and a […]

Plastic injection molding products appear ripple how to do?

When we were making a plastic injection molding product, technician helped slow down the injection molding speed because of the problem of spray lines, which was solved smoothly.
However, after injection molding for a period of time, the bad problem of wavy pattern suddenly appeared. We can only find the technician again and ask if the injection molding speed is too fast?
He smiled and said: just adjusted the injection speed and solved the spray pattern. The problem of wavy pattern […]

Most customers are concerned about the problem. What criteria are used to evaluate the injection molding price?

Everything is worth the price. In the current environment of liberalization of the economic market, the price of any material is only determined by the market, and no one or any unit has the final say to set it up. Take plastic injection molding as an example. Any manufacturer will follow the market rules to calculate, and everyone will be happy if they can maintain a little profit after deducting the basic cost. There will be no more huge […]

Two brothers of injection molding products: TPU and TPR

Speaking of the two major materials in injection molding products: TPU and TPR, I have to mention them. They play an important role in the injection molding industry. So, their TPR materials and silica gel materials have similar hardness and physical properties, and are environmentally friendly soft compounds. What are the differences between them?
Injection molded TPU has a wide hardness range (60ha-85hd), wear resistance, oil resistance, transparency and good elasticity. It is widely used in daily necessities, sporting goods, […]

What if bubbles appear in the production of silicone mold?

Causes of bubbles:
The reason for bubbles in the manufacturing process of silicone mold is that air will be mixed in the mixing process of silicone and curing agent, and bubbles will appear. If there is no vacuum in the process of making the mold, the silicone mold will produce bubbles.
How can we solve it?
Methods a vacuum machine is used in the process of making  silicone mold, which can eliminate the generation of bubbles. Put the stirred  silicone into the vacuum […]