Tag - custom molds

The quality of the finished mold can be seen during processing

1. High requirements for mold processing accuracy: a finished mold is composed of many parts, and some molds are formed through complex splicing, so the processing accuracy of each splicing part needs to be emphasized in the mold processing process, otherwise the upper and lower molds and cavities cannot be combined.
2. The mold contour is complex: the surface shape of some products, such as automobile panels, aircraft parts, toys and household appliances, forms a combination of multiple curved surfaces. […]

There will be no problems in the process of injection molding as long as you pay a little attention

Injection mold needs to pay attention to many problems in the production process in order to produce qualified products.
1. In injection mold processing, due to the different shrinkage coefficients of various materials, the mold must have a reasonable shrinkage rate.
2. The injection mold should have enough rigidity during processing, otherwise it will deform and cause “flash” during mold closing and pressure maintaining.
3. The cooling (water passage) in the processing of injection mold is related to product quality, size, shape, […]

How to check and accept the injection mold

In order to ensure that the injection molding mold can meet the standard, it is necessary to consider the application regulations and design scheme, and ensure its service life. When it is normally completed and put into operation, it is necessary to ensure the quality of the mold specification from the aspects of product quality, mold structure and injection molding process regulations. On the other hand, the transformation of household appliances has also driven the in-depth development of household […]

Pay attention to speed and time when machining the mold

On the die steel with the same surface roughness, the machining speed generated by relative electric pulse during electrode loss is an important factor index to measure the performance of electric pulse machining and machine tool technology products. Generally, in this case, the manufacturer will provide its own processing current to ensure that we can effectively realize the processing speed when the mold is in the processing state. However, in the actual processing design process of life, the processing […]

These work of injection mold should also be done in place

Injection mold is a more important work for various mold manufacturers, and can be used in many industries. However, it is not just that there is nothing after injection molding. It is also necessary to maintain the mold at ordinary times. What we bring today is how to maintain the mold.
Firstly, the injection mold manufacturer shall provide an information card for each sub mold to record its use, maintenance and damage in detail, including cleaning, lubrication and rust prevention, […]

Mold processing equipment must be carefully checked before use

1、 Before the mold processing equipment starts to work, we should check whether there are problems in each part, whether the clutch and braking equipment are normal, and whether there is lubricating oil in the gear part. After the inspection, turn on and run the machine tool for about 3 minutes. If there is no abnormality, it can be put into use.
2、 When all workers enter the work area, they should check their clothes to see if they meet […]

How is the crack of injection molded products caused

(1) In the process of processing, the pressure is too high, the speed is fast, the filling is more, and the pressure holding time is too long, resulting in large internal pressure, resulting in cracks in the die.
(2) adjust the mold opening speed and pressure during injection process to avoid the failure caused by strong drawing.
(3) Appropriately increase the mold design temperature to make the parts easy to realize demoulding, and appropriately reduce the material temperature to prevent decomposition.
(4) […]

Various factors must be considered in the design of plastic injection mold

At this stage, the competition between injection mold manufacturing industries and the cost of mold and injection molding processing are the topics that every business is very concerned about. How to reduce the cost and create economic benefits? In injection mold manufacturing, some key factors must be fully considered:
1. Injection molding cost
According to the size of machine learning equipment, how much is each beer, so as to confirm the qualifying method and number of points of corporate culture products. […]

What are the criteria of metal insert mold design?

Metal insert mold precision connector mold
The design criterion of metal insert mold is similar to that of conventional plastic mold. For example: try to keep the same wall thickness and ensure the tolerance accuracy of the mold.
However, the unique factors need to be considered when considering the forming of inserts. Since the injection inserts are placed in the mold, it is important to carefully consider the location of the inserts. It is also important to keep them in place […]