What should be done to make the injection mold better

I believe everyone should know something about injection mold. The main content of this article is the polishing of injection mold, why to polish and what should be paid attention to in polishing.

Polishing injection mold has two main purposes; One is to increase the smoothness of the mold to make the surface of the products produced by the mold smooth, beautiful and beautiful. The other is that we can improve the mold, which is easy to lead to demoulding, so that the plastic will not be stuck to the mold

Precautions for polishing injection mold are as follows:

1. When machining a new cavity, first check the surface of the workpiece and clean the surface with kerosene to make the surface of the oilstone not sticky and dirty and lose the cutting function.

2. When grinding coarse grain, it can be carried out in the order of difficulty first and then easy, especially for some dead corners that are difficult to grind, deep or bottom should be grinded first,

3. Some workpieces may need to be polished together in multiple groups. First study the coarse grain or spark pattern of a single workpiece, and then put all workpieces together for polishing.

4. For large plane or side plane workpieces, use oilstone to study the rough pattern, and then use straight steel plate to conduct light transmission test to check whether there is uneven or reverse buckle damage. If there is reverse buckle, it will lead to production difficulty or part pulling.

5. In order to prevent the injection mold design workpiece from developing reverse buckle or other problems, the bonding surface needs to be protected, it can be pasted with saw blade or sand paper on the edge, so as to obtain an ideal protective effect.

6. Pull the grinding die plane back and forth, and drag the oilstone handle as flat as possible, no more than 25 °; Because the slope is too large, the force will impact from top to bottom, which is easy to cause a lot of thick lines on the workpiece.

7. If the plane of a workpiece is polished with copper or bamboo pressed with sandpaper, the sandpaper shall not affect the use area of other tools, otherwise it will be grinded to the place that should not be grinded.

8. The shape of the grinding tool shall be close to the die surface to ensure that the workpiece is not deformed.

If the above points are done well, the appearance of the injection mold will be very good after grinding.



About Huizhou Dj Molding Co., Ltd

Dj Mold is a China mold maker of plastic molds- injection mold, die casting moulds, plastic blow molding, rotational molding, medical plastic injection molding, two shot plastic injection molding, insert molding, overmolding, metal injection molding, micro injection molding, powder injection molding, ceramic injection molding, liquid injection molding, husky injection molding, household mold, casting mold, die mold tool, custom molds, china moulds, rapid prototyping tooling, plastic prototyping tooling, punch press tooling, die and tooling for mobile/ cell phone parts, automotive parts, vacuum cleaners, rechargeable tools, telephones, copiers, computers, multimedia speakers, and many other electronic products and household appliances. And also a plastic product manufacturer, mold manufacturer China– plastic parts, plastic water tank, plastic balls, plastic containers, plastic buckle, plastic anchor, plastic hanger, plastic spoon, plastic pipe fitting, plastic tumble, plastic tableware, plastic cups, plastic bottles, plastic tray, plastic cosmetic container, plastic case, plastic food container, plastic chairs, plastic caps, plastic cap closure, plastic tubes, plastic water pipes, plastic knobs, plastic tubing, plastic utility boxes, plastic racks and so on.

Person: James Yuan
Company: Huizhou Dj Molding Company Limited
Add:  LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong Province, China
Tel: 86-752-6682869
Email: [email protected]

Site: https://www.jasonmolding.com/custom-injection-molding/

Share this post