apa “mengoptimalkan” proses pencetakan injeksi berarti? Secara umum, ini berarti bahwa proses harus diperiksa dengan cermat untuk mencapai tujuan proses yang berharga dan efektif. Mari kita lihat lima teknik untuk melakukan ini.
1. Kontrol kualitas dengan membuat sampel.
Tentu saja, quality control is the key part of the whole molding production process, which is usually carried out in the later stage of production, while the quality control of sample parts is different. In order to pursue the optimization of injection molding process, sample parts can play a key role. They don’t have the risk of full production testing and optimization. Tambahan, they can have a better understanding of the process and how the machine was run in a more controlled environment.
By evaluating the sample production process of limited parts, we can directly understand the whole process, evaluate the part quality, injection volume, and the melting temperature of the actual batch of resin on hand. Results that can be obtained through sample runs and powerful quality control reviews often make up for the time and money you spend.
2. Mold evaluation and testing.
Checking the function of the mold with the required materials can also generate significant benefits in optimizing the molding process. A wide variety of resin materials and formulations are available, which means that the subtle differences between viscosity, suhu leleh, suhu cetakan, dll. can be added together, resulting in cumulative fluctuations and changes in the molding process, resulting in parts scrapping and low process efficiency. Some key points of mold testing are shot test, filling rate and pattern, pressure curve evaluation and so on.
3. Test and adjust the mold and injection molding process.
After obtaining the available information from mold testing and sample part quality control, fine tuning can be made, which can greatly benefit process optimization and efficiency. Sebagai contoh, if you encounter short time problems or inconsistent fill times, you can adjust the mold design and layout to optimize for these problems. If the mold temperature is inconsistent or out of the acceptable range, it can be adjusted to obtain a better heating and cooling time.
4. Process parameters and performance range.
From machinery to molds to resins, every part of the injection molding process has an acceptable performance range. When you make incremental (or significant) adjustments to process components using the tangible results of the test, the results can begin to accumulate until you have a sense of profit, results, and value that you can provide to customers.
5. Create or follow the given experimental design process.
Repetitive processes will produce reliable and acceptable parts rates that can be easily troubleshooting and enable the operator to understand as much as possible how the process works. Repeatability is also a key factor to keep in mind when testing to optimize the injection molding process.
Experimental design essentially means that you are performing tests in a planned, structured, and documented manner. This means that any violations or other problems found can be easily traced back to their specific sources.
Tentang JasonMould Industrial Company Limited
Jasonmould adalah pembuat cetakan Cina dari cetakan plastik- cetakan injeksi, cetakan die casting, cetakan tiup plastik, cetakan rotasi, medis cetakan injeksi plastik, dua tembakan cetakan injeksi plastik, masukkan cetakan, overmolding, cetakan injeksi logam, cetakan injeksi mikro, cetakan injeksi bubuk, cetakan injeksi keramik, cetakan injeksi cair, cetakan injeksi husky, cetakan rumah tangga, pengecoran cetakan, alat cetakan mati, cetakan khusus, cetakan cina, perkakas prototipe cepat rapid, perkakas prototipe plastik plastic, perkakas tekan pukulan, mati dan perkakas untuk bagian ponsel / ponsel cell, bagian otomotif, penyedot debu, alat isi ulang, telepon, mesin fotokopi, komputer, speaker multimedia, dan banyak produk elektronik dan peralatan rumah tangga lainnya. Dan juga produsen produk plastik, produsen cetakan Cina- bagian-bagian yang terbuat dari plastik, tangki air plastik, bola plastik, wadah plastik, gesper plastik, jangkar plastik, gantungan plastik, sendok plastik, pemasangan pipa plastik, gelas plastik, peralatan makan plastik, gelas plastik, botol-botol plastik, nampan plastik, wadah kosmetik plastik, kotak plastik, wadah makanan plastik, kursi plastik, tutup plastik, penutupan tutup plastik, tabung plastik, pipa air plastik, kenop plastik, tabung plastik, kotak utilitas plastik, rak plastik dan sebagainya.
Kontak:
Orang: James Yuan
Perusahaan: JasonMould Industrial Company Limited
Menambahkan: Desa LongGang,Kota LongXi,Kabupaten BoLuo,Kota HuiZhou,Provinsi Guangdong, Cina
Telp: 86-752-6682869
Surel: [email protected]
Situs: https://www.jasonmolding.com/custom-injection-molding/
