Chromatic aberration is a common defect in Tim Perkakas Dan Desain Internal. Tidak jarang perbedaan warna bagian yang cocok menyebabkan penolakan mesin cetak injeksi dalam batch. Ada banyak faktor yang mempengaruhi chromatic aberration, termasuk resin, masterbatch, masterbatch mixing with raw materials, proses pencetakan injeksi, injection molding machine, mold and so on. Because of the wide range involved, chromatic aberration control technology is also recognized as one of the more difficult technologies to master in injection molding. In the actual production process, we usually proceed from the following five aspects to control the color difference.
- eliminate the influence of injection molding machine and mold factors.
To select the injection molding machine with the same capacity as the main product of injection molding, if the injection molding machine material dead angle and other problems, it is best to replace equipment. For the color difference caused by the mold pouring system and the exhaust groove, it can be solved by the corresponding part of the mold maintenance mold. We must first solve the problem of injection molding machine and mold before organizing production so as to reduce the complexity of the problem.
- eliminate the influence of resin and color masterbatch.
Controlling the raw materials is the key to solve the chromatic aberration completely. Karena itu, especially in the production of light-colored products, we can not ignore the different thermal stability of raw resin on the product color fluctuation caused by the obvious impact. Since most injection molding manufacturers do not produce plastic masterbatches or color masterbatches themselves, attention can be focused on production management and raw material inspection. That is to strengthen the inspection of raw materials warehousing.
The same product is produced with the same manufacturer, the same brand master batch and master batch as far as possible; for master batch, we must carry out spot check and color test before mass production, both with the previous proofreading, but also in this comparison, if the color difference is not big, can be considered qualified, as batch master batch has slight color difference, can be heavy color master. The new mixture is then used to reduce the chromatic aberration caused by uneven mixing of the color master. Pada waktu bersamaan, we also need to focus on testing the thermal stability of raw resins, masterbatches, for poor thermal stability, we suggest manufacturers to change.
- eliminate the influence of uneven blending of masterbatch and masterbatch.
Mixing the plastic masterbatch with the color masterbatch will also make the product color changeable. When masterbatch and masterbatch are mechanically mixed evenly and fed into hopper through downdraft material, the masterbatch is easily adsorbed on the hopper wall because of static electricity. This will inevitably cause the change of masterbatch amount in injection molding cycle, resulting in chromatic aberration.
This situation can be solved by raw material inhalation after hopper and manual agitation. Many companies now use feeders to add color masterbatch, which saves a lot of manpower and provides a great help for color difference control, but many companies because of improper use, the results are often unsatisfactory.
The amount of Color Masterbatch added to the feeder at a fixed speed depends on the plasticizing time, and the plasticizing time itself is fluctuating, sometimes fluctuating or even relatively large, so to ensure a constant amount of feeding, feeder feeding time should be fixed, and the setting time is less than the minimum plasticizing time. When using the feeder, it should be noted that the outlet of the feeder is small. After a period of use, it may cause inaccurate feeding and even cause the feeder to stop running. Karena itu, regular cleaning is necessary.
- reduce the influence of barrel temperature on chromatic aberration.
Dalam produksi, it is often encountered that the temperature of the barrel changes dramatically due to the damage and failure of a heating ring or the out-of-control of the heating control part. It is easy to judge the color difference caused by this kind of reasons. Umumnya, the color difference caused by the failure of the heating ring will be accompanied by the non-uniform plasticization phenomenon. The out-of-control long-burning of the heating control part is often accompanied by the product gas spot, serious discoloration and even coking phenomenon. Karena itu, it is necessary to inspect the heating part frequently in production and replace the heating part timely when it is found that the heating part is damaged or out of control so as to reduce the probability of such color difference.
- reduce the impact of injection molding process adjustment.
The injection temperature, Tekanan balik, injection period and the amount of chromophore should not be changed as much as possible when the injection process parameters are adjusted for non-chromophore reasons. As far as possible to avoid the use of high injection speed, high back pressure and other strong shear effect caused by injection molding process, to prevent local overheating or thermal decomposition and other factors caused by color difference. Strictly control the temperature of each heating section of the barrel, especially the nozzle and the heating part close to the nozzle.
JasonMould Industrial Company Limited, didirikan pada 2010, adalah produsen cetakan injeksi terkemuka di Cina. JasonMould mengkhususkan diri dalam produksi cetakan plastik untuk peralatan rumah tangga, peralatan medis, peralatan elektronik, peralatan keselamatan serta sistem pemantauan.
Perusahaan telah berakhir 15000 pabrik meter persegi. Dengan divisi perkakas injeksi plastik yang memiliki mesin dan keahlian yang berbeda, JasonMould menawarkan alat dari suku cadang ponsel kecil dan presisi hingga sebesar suku cadang otomotif. Alat kami terutama diekspor ke AMERIKA SERIKAT., Eropa, Jepang dan Inggris. Strategi diversifikasi dan layanan penuh JasonMould telah memenangkan pujian dari pelanggan di seluruh dunia.
Misi kami adalah untuk menyediakan produk dan layanan cetakan berkualitas tinggi kepada pelanggan kami. Kami bertujuan untuk melampaui ekspektasi harga pelanggan kami, kualitas dan pengiriman tepat waktu. Untuk mencapai misi kami, JasonMould:
- Berkomitmen untuk terus meningkatkan keterampilan dan efisiensi karyawan,
- Memberikan karyawan kami lingkungan kerja yang bersih dan aman,
- Meningkatkan teknologi mesin dan peralatan pendukung melalui program perawatan yang ketat, dan
- Mempertahankan perkakas pelanggan ke puncak kinerja tertinggi
Untuk lebih lanjut tentang produsen kustom produk cetakan plastik,silahkan kunjungi https://www.jasonmolding.com/
Pertanyaan Hubungi:
Kontak person: James Yuan
Nama Perusahaan: JasonMould Industrial Company Limited
Alamat: Desa LongGang,Kota LongXi,Kabupaten BoLuo,Kota HuiZhou,Provinsi Guangdong, Cina
Telepon: 86-752-6682869
Surel: [email protected]
Situs web: https://www.jasonmolding.com
