Proses pencetakan injeksi tidak statis, logis, karena produk yang berbeda, bahan yang berbeda, mesin cetak injeksi dan persiapan bahan yang berbeda dan kondisi yang berbeda, proses pencetakan injeksi akan menghasilkan banyak faktor yang tidak pasti, sehingga sebagai pekerja pemrosesan cetakan injeksi, sesuai dengan kondisi spesifik untuk penyesuaian optimasi proses yang sesuai adalah perwujudan tertinggi dari teknologi pemrosesan cetakan injeksi. Karena itu, the processing optimization of injection parts of sensor copper nut +ABS can be carried out from the following aspects:
- Material pretreatment
According to the different water absorption of different materials, some materials need to be dried before processing, remove the water in the material, in order to reduce the proportion of defective products in the injection molding process;
- Maintain the processing status of injection molding equipment
Injection molding machine is a high precision equipment, among which the division of labor and cooperation of various systems requires a high degree of tacit understanding, maintain a good working state not only can be more efficient operation, but also can reduce the bad probability in the production process;
Maintenance of injection molding machine includes: dust treatment, lubrication treatment, replacement of worn parts, reset of fastening screws, calibration of pressure system, dll.
- Optimization of injection mold processing design
Mould in the development process needs to be developed by according to the basic properties of application materials, different shrinkage rate, different water imbibitions, and different molding flow performance needs to be taken into consideration, design mold cavity body uniform melt flow direction, pressure and gas emission conditions, such as is decrease the difficulty of injection increase the focus of the production efficiency, efficient molding mould is very important.
- Pemeliharaan cetakan
Efficient mold is important, but it is also very important to maintain the efficient operation of the mold consistently, to keep the mold good mainly include: keep the mold clean, avoid wear and tear, timely replacement of worn parts, maintain lubrication, control the temperature difference effect, timely adjustment of state, dan seterusnya.
Tentang JasonMould Industrial Company Limited
Jasonmould adalah pembuat cetakan Cina dari cetakan plastik- cetakan injeksi, cetakan die casting, cetakan tiup plastik, cetakan rotasi, medis cetakan injeksi plastik, dua tembakan cetakan injeksi plastik, masukkan cetakan, overmolding, cetakan injeksi logam, cetakan injeksi mikro, cetakan injeksi bubuk, cetakan injeksi keramik, cetakan injeksi cair, cetakan injeksi husky, cetakan rumah tangga, pengecoran cetakan, alat cetakan mati, cetakan khusus, cetakan cina, perkakas prototipe cepat rapid, perkakas prototipe plastik plastic, perkakas tekan pukulan, mati dan perkakas untuk bagian ponsel / ponsel cell, bagian otomotif, penyedot debu, alat isi ulang, telepon, mesin fotokopi, komputer, speaker multimedia, dan banyak produk elektronik dan peralatan rumah tangga lainnya. Dan juga produsen produk plastik, produsen cetakan Cina- bagian-bagian yang terbuat dari plastik, tangki air plastik, bola plastik, wadah plastik, gesper plastik, jangkar plastik, gantungan plastik, sendok plastik, pemasangan pipa plastik, gelas plastik, peralatan makan plastik, gelas plastik, botol-botol plastik, nampan plastik, wadah kosmetik plastik, kotak plastik, wadah makanan plastik, kursi plastik, tutup plastik, penutupan tutup plastik, tabung plastik, pipa air plastik, kenop plastik, tabung plastik, kotak utilitas plastik, rak plastik dan sebagainya.
Kontak:
Orang: James Yuan
Perusahaan: JasonMould Industrial Company Limited
Menambahkan: Desa LongGang,Kota LongXi,Kabupaten BoLuo,Kota HuiZhou,Provinsi Guangdong, Cina
Telp: 86-752-6682869
Surel: [email protected]
Situs: https://www.jasonmolding.com/custom-injection-molding/
