1、 Scop
Pentru a consolida controlul calității procesului, îmbunătăți calitatea produsului, îmbunătățirea eficienței producției, controlează eficient numărul de reluări, și să supravegheze autoinspecția operatorilor.
2、 Scopul aplicatiei
Toți operatorii atelierului de injecție.
3、 Conţinut
1. Înainte de producția continuă, operatorul trebuie să trimită prima bucată de inspecție de calitate pentru confirmare, iar prima piesă poate fi produsă numai după ce este calificată și sigilată. Eticheta probei sigilate trebuie să aibă numărul articolului, Nume, sample sealing person and sample sealing time, otherwise the products produced will be regarded as defective products.
2. The first product produced after color change, mold change, material change and mold repair can only be mass produced after passing the self inspection and sending it to the quality inspection for confirmation and sample sealing.
3. The products produced by each shift shall be self checked against the sealed samples and injection molding operation instructions. Before taking over the shift, check whether the plan card and the products, materials and colors after mold change are corresponding; Whether the sealing samples and injection molding operation instructions are in place. When taking over the shift, the products must undergo self inspection and initial inspection, and be inspected item by item according to the sealed samples, injection molding operation instructions and relevant quality documents. After confirmation, the products can be produced after taking over the shift.
4. Each shift shall carry out comprehensive self inspection as required, and complete the final product inspection before leaving work. If the final product inspection does not meet the quality requirements, all products of the shift shall be re inspected immediately.
5. If the product does not meet the quality requirements, the technician or the supervisor on duty shall be notified in time for adjustment. The product can be produced only after the product meets the quality requirements and is sent to the quality inspection for confirmation.
6. If you don’t know or know the product quality problem or can’t make accurate judgment, you should send the product to the quality inspector for confirmation and judgment, and know the product quality from the quality inspector.
7. Self checking method
8. Reworked products
The reworked products must be reworked by the operator, and no salary shall be paid during the rework period. For nonconforming products, the quality inspector shall issue a nonconforming product disposal form and directly submit it to the shift supervisor for signature. Reworked products can be warehoused only after they are confirmed to be qualified by quality inspection. The shift supervisor shall carefully implement the reworked products, and teach the operators to prevent the recurrence of similar problems according to the unqualified items determined by the quality inspection.
9. Nonconforming products
A. The operator must report the non-conforming products produced in the production process to the supervisor on duty for treatment, and record the number of non-conforming products in the daily production report of the injection molding workshop. b. The shift supervisor shall analyze the causes of products with high defect rate.
c. The unqualified products produced by the operator can be crushed after being confirmed by the shift supervisor and the quality inspector.
d. The shift supervisor shall collect the daily inspection record form of injection molding workshop for each machine every day to the workshop supervisor for review, and track, verify and handle the abnormalities.
e. Supervise and urge operators to report non-conforming products, and the shift supervisor to handle them after reporting. The workshop controls the rate of defective products.
Despre Huizhou Dj Molding Co., Ltd.
Dj Mold este un Producător de mucegai din China a matrițelor din plastic- matriță de injecție, matrițe de turnare sub presiune, turnare prin suflare din plastic, turnare prin rotație, medical turnare prin injecție a plasticului, doi împușcați turnare prin injecție a plasticului, turnare cu inserție, supraformare, turnare prin injecție a metalelor, turnare prin injecție micro, turnare prin injecție cu pulbere, turnare prin injecție ceramică, turnare prin injecție de lichid, turnare prin injecție husky, mucegai de uz casnic, mucegai de turnare, unealtă pentru matriță, matrite la comanda, mucegaiuri din china, scule de prototipare rapidă, scule de prototipare din plastic, scule de presare, matriță și scule pentru piese de telefon mobil / mobil, piese auto, aspiratoare, instrumente reîncărcabile, telefoane, copiatoare, calculatoare, difuzoare multimedia, și multe alte produse electronice și electrocasnice. Și, de asemenea, un producător de produse din plastic, producător de mucegai China- componente de plastic, rezervor de apă din plastic, bile de plastic, containere de plastic, cataramă din plastic, ancoră din plastic, cuier din plastic, lingura de plastic, racord de țevi din plastic, cadere din plastic, Veselă din plastic, pahare de plastic, sticle de plastic, tava de plastic, recipient pentru cosmetice din plastic, Cutie de plastic, recipient de plastic pentru alimente, scaune din plastic, capace din plastic, închidere capac plastic, tuburi din plastic, conducte de apă din plastic, butoane din plastic, tuburi din plastic, cutii utilitare din plastic, rafturi din plastic și așa mai departe.
a lua legatura:
Persoană: James Yuan
Companie: Huizhou Dj Molding Company Limited
Adăuga: Satul LongGang,Orașul LongXi,Județul BoLuo,Orașul HuiZhou,Provincia Guangdong, China
Tel: 86-752-6682869
E-mail: [email protected]
Site: https://www.jasonmolding.com/custom-injection-molding/
