Công ty TNHH Công nghiệp JasonMould là một người chuyên nghiệp china plastic injection molding or moulding company with mould and dies development and manufacturing.
Hôm nay Jasonmould sẽ cho bạn biết cách sản xuất thông minh trong lĩnh vực ép nhựa.
Sản xuất thông minh được nói đến khá nhiều. Nó có tên khác, quá, like the Internet of Things (IoT), Industrial IoT (IIoT), and Industry 4.0. The term IoT was first coined by Peter T. Lewis in 1985 to describe “the integration of people, quá trình, and technology with connectable devices and sensors to enable remote monitoring, status, manipulation, and evaluation of trends of such devices.”
So the term has been around for a while now, but the concept still continues to develop and evolve as technology continues to advance through new hardware like sensors, and through the collection and analysis of data. Vì thế, how have the advancements in smart manufacturing affected the plastic injection molding business? This article takes a look at the topic.
Benefits of Smart Manufacturing
Smart factories use smart manufacturing to gain production efficiencies, improve production quality and reduce time to market. Machines can now communicate failure points and collect data that can be used to improve predictive and preventative maintenance, which in the long run improves uptime. Data analysis is used to predict and prevent failure; it indicates when intervention is required and recommends the necessary corrective actions. Troubleshooting is more efficient, which benefits both manufacturers and customers.
Hệ thống điều khiển chuyển động, Connectivity and Data
The entire concept of smart manufacturing in injection molding revolves around collecting and analyzing the data. Sensors collect the data and networks transport the data. If a device or piece of equipment on the floor is standalone, it will not contribute to the collective knowledge of the smart factory. Devices and machinery equipped with sensors have the ability to monitor, sưu tầm, exchange and analyze data – all without human interaction. The sensors collect data, and communicate better information on the plant floor, as well as outside the plant (or from the outside in) faster, in order to make easier decisions.
Every device that has the ability to gather intelligence needs to be on a backbone of some type that allows it to produce data or have data pulled out of it. New sensor networks can be established, or sensors and data networking can be added to existing devices. The goal in injection molding is to connect the equipment on the plant floor to a network that can monitor, measure, store, and retrieve data.
As for the data itself, decisions need to be made that make the most sense for the injection molder. How and where to house the data is one such decision – should it be kept in-house, or outside of the company walls? Data security is of paramount concern, so if data is stored off premises, remote connectivity and how to safely get into your system from the outside needs to be addressed.
Chất dẻo, in Particular
Since plastics is the third largest sector in the manufacturing industry, it warrants special consideration in the IIoT as it impacts manufacturers and their customers. In terms of injection molding complex components, the data gathered and analyzed can help ensure maximum repeatability in the injection molding process, consistent quality, and low defects. And again, the data also helps determine preventative machine maintenance which helps avoid unplanned downtime.
From the customer perspective, smart manufacturing provides many benefits for communication and visibility. Machine data collection and reporting gives the customer important timing information on project and production order status.
And so it goes. The drive to glean more – and better – data from industrial equipment and systems will continue to improve productivity in the plastic injection molding sector as technology, sensors, and systems continue to evolve, to the benefit of the molders and their customers.
Giới thiệu về Công ty TNHH Công nghiệp JasonMould
Jasonmould là nhà sản xuất khuôn nhựa- khuôn ép, khuôn đúc chết, thổi đúc, đúc quay, Y khoaép nhựa, ép phun hai lần, chèn khuôn, quá nhiều, ép kim loại, ép phun vi mô, ép phun bột, ép phun gốm, ép phun chất lỏng, ép phun khàn khàn, khuôn gia dụng, khuôn đúc, công cụ khuôn chết, khuôn tùy chỉnh, khuôn Trung Quốc, công cụ tạo mẫu nhanh, dụng cụ tạo mẫu nhựa, dụng cụ bấm lỗ, chết và dụng cụ cho các bộ phận điện thoại di động / điện thoại di động, phụ tùng ô tô, máy hút bụi, công cụ có thể sạc lại, điện thoại, máy photocopy, máy vi tính, loa đa phương tiện, và nhiều sản phẩm điện tử, đồ gia dụng khác. Và cũng là một nhà sản xuất sản phẩm nhựa- bộ phận nhựa, bồn nước nhựa, bóng nhựa, hộp đựng bằng nhựa, khóa nhựa, neo nhựa, Móc treo bằng nhựa, muỗng nhựa, lắp ống nhựa, khối nhựa, bộ đồ ăn bằng nhựa, ly nhựa, chai nhựa, khay nhựa, hộp đựng mỹ phẩm bằng nhựa, hộp nhựa, hộp nhựa đựng thực phẩm, ghế nhựa, mũ nhựa, đóng nắp nhựa, ống nhựa, ống nước nhựa, núm nhựa, ống nhựa, hộp nhựa tiện ích, giá đỡ nhựa và như vậy.
Tiếp xúc:
Người: James Yuan
Công ty: Công ty TNHH Công nghiệp JasonMould
Thêm vào: Làng LongGang,Thị trấn LongXi,Hạt BoLuo,Thành phố Huệ Châu,Tỉnh Quảng Đông, Trung Quốc
ĐT: 86-752-6682869
E-mail: [email protected]
Địa điểm: https://www.jasonmolding.com
