5 STANDARDER FOR FORM DEFINERET AF SPI

Prisen på forme adskiller sig fra deres egne standarder. Plastindustriens samfund(SPI), en professionel formforskningsforening i Amerika, opdelt forme i 5 standarder, som har forskellige produktionskrav. Alle disse forme er kun egnede til sprøjtestøbemaskinen med 400 tons eller mindre. I det følgende papir, vi vil præsentere dig for disse 5 slags forme:

Klasse 101 forme:

Det vurderet til 1,000,000 gange eller flere cyklusser, typisk brugt i masseproduktion, med de bedste råvarer, so that the price is expensive. The mold design requirements:

1. Itis necessary to have detailed information of mold design.
2. Solidityof the mold base must at least reaches the level of 280
3. Solidity standard of the mold surface(including cavities and cores) must be withinthe range of 450 Other accessories such as slider, lifter, coping should be made of hard tool steel.
4. Ejector machine must have guiding elements.
5. Slidersmust be equipped with wear plates.
6. Temperature controller should be installed in cavities and cores,sliders and wherever if possible.
7. For the service life of mold, the erosion of cooling water pipelinewill decrease the quality of products so that injection molding manufacturing cycle will be increased. Therefore it is suggested that the embedded parts of cooling water pipeline should be dealt with erosion resistant treatment..
8. All kind of this moldshould be equipped with parting line locks

Klasse 102 forme:

Its cycle can reaches no more than 1,000,000 times for mass-up production, and its requirements as blow:

1. Itis necessary to have detailed information of mold design.
2. Solidityof the mold base must reaches the level of 280 BHN .
3. Cavities and coresmust be within the range of solidity level of 450 BHN. Other functional parts should be dealt with heat treatment.
4. Temperature controller should be installed in cavities and cores,sliders wherever possible.
5. All kind of this moldshould be equipped with parting line locks.

Klasse 103 forme:

Its cycle can reaches 500,000 times for medium production with the cost- effective advantage.

1. Itis necessary to have detailed information of mold design.
2. Solidityof the mold base must reaches the level of 165
3. Cavities and coresmust be reach the solidity level of 280 BHN or above.
4. Other accessories are optional.

Klasse 104 forme:

Its cycle reaches 100,000 times for low- volume production. It has a reasonable price, but also has a shortcoming: low wear resistant.

1. It is suggested that providing the mold design .
2. Mold base material may be made of mild steel or aluminum.
3. Cavitiescan be aluminum, steel or other identified materials.
4. Other accessories are optional.

Klasse 105 forme:

This type of mold is the cheapest one with the cycle not more than 500 times using only for the limited number of prototype pieces. The mold structure may be made of casting materials, epoxy resin or other materials which have sufficient solidity.

Om JasonMould Industrial Company Limited

Jasonmould er producent af plastforme- sprøjtestøbeform, formstøbning forme, plastblæsestøbning, rotationsstøbning, medicinsk plast sprøjtestøbning, to skud plast sprøjtestøbning, indsatsstøbning, overformning, metal sprøjtestøbning, mikro sprøjtestøbning, pulverformsprøjtning, keramisk sprøjtestøbning, flydende sprøjtestøbning, husky sprøjtestøbning, husholdningsskimmel, støbeform, formværktøj, brugerdefinerede forme, porcelæn forme, værktøj til hurtig prototyping, værktøj til prototyper i plastik, slagpresseværktøj, dør og værktøj til mobiltelefon/ mobiltelefondele, bildele, støvsugere, genopladelige værktøjer, telefoner, kopimaskiner, computere, multimediehøjttalere, og mange andre elektroniske produkter og husholdningsapparater. Og også en plastproduktproducent- plastikdele, vandtank i plast, plastik bolde, plastbeholdere, plastspænde, plastanker, plast bøjle, plastske, rørledning i plast, tumlet plast, bordservice i plast, plastik kopper, plastik flasker, plastbakke, kosmetisk beholder af plast, plastkasse, madbeholder i plast, plaststole, plastikkapper, lukning af plasthætte, plastrør, vandrør i plast, plastik knapper, plastrør, brugskasser i plast, plaststativer og så videre.

 

For mere om tilpasset producent af plaststøbningsprodukter,besøg venligst https://www.jasonmolding.com/

Kontakt:

Kontaktperson: James Yuan

Firmanavn: JasonMould Industrial Company Limited

Adresse: LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong-provinsen, Kina

Telefon: 86-752-6682869

E-mail: [email protected]

Internet side: https://www.jasonmolding.com/