- Indsprøjtningssystem
Indsprøjtningssystem er en af hovedkomponenterne i sprøjtestøbemaskine, generelt er der tre hovedmetoder: svupper, skrue, skrue præ-plast stempel indsprøjtning. Nu meget brugt er skruetype. Effekten er, at i en cyklus af injektionsmaskinen, en vis mængde plast kan opvarmes og plastificeres inden for en bestemt tid, og den smeltede plast kan sprøjtes ind i formhulrummet gennem en skrue under et vist tryk og hastighed. Efter injektionen, the melt in the mold cavity must be fixed. The composition of injection system: injection system consists of plasticizing equipment and power transmission equipment. The plasticizing equipment of screw injection molding machine is mainly composed of feeding equipment, material barrel, screw rod and nozzle part. Power transfer equipment includes injection cylinder, injection seat moving cylinder and screw drive equipment (melt motor).
- Spændesystem
The effect of the clamping system is to ensure mold closing, opening and ejecting products. På samme tid, after the mold is closed, a satisfactory clamping force is supplied to the mold, so as to resist the pressure of the mold cavity when the molten plastic enters the mold cavity, avoid the mold seam and cause the bad status of the product. Composition of the clamping system: The clamping system is mainly composed of clamping equipment, adjusting structure, ejecting structure, front and rear fixed template, moving template, clamping cylinder and safety maintenance organization.
- Hydraulic system
Complete the injection molding machine according to the process requirements of various actions to supply power, and meet the injection molding machine parts required pressure, hastighed, temperature and other requirements. It is mainly composed of various hydraulic components and hydraulic auxiliary components, in which the oil pump and motor are the power source of the injection molding machine. All kinds of valves operate oil pressure and flow rate, and then satisfy the requirements of injection molding process.
- 4. Electric control system
Electrical control system and hydraulic system can be reasonably coordinated to complete the needle machine process requirements (tryk, temperatur, hastighed, tid) and various program actions. It is mainly composed of electrical appliances, electronic components, udseende, heater, sensors and so on. Generelt, there are four kinds of manipulation methods, manual, semi-automatic, automatic and adjusted.
- 5. Heating / kølesystem
For heating the barrel and injection nozzle, the barrel of injection molding machine generally selects the electric heating coil as heating equipment, which is installed outside the barrel and is subdivided by thermocouple. Heat passes through the wall of the cylinder to provide heat for the plasticization of materials; the cooling system is mainly used to cool the oil temperature, too high oil temperature will cause a variety of faults, so it is necessary to control the oil temperature. The other part needs to be cooled near the discharge port of the material pipe to avoid melting of the material at the discharge port, resulting in the material can not be fed properly.
JasonMould Industrial Company Limited, etableret i 2010, er en førende sprøjtestøbningsproducent i Kina. JasonMould er specialiseret i produktion af plastforme til husholdningsapparater, medicinsk udstyr, elektronisk udstyr, sikkerhedsudstyr samt overvågningssystem.
Virksomheden har overstået 15000 kvadratmeter fabrik. Med plastindsprøjtningsværktøjsafdelinger, der besidder forskelligt maskineri og ekspertise, JasonMould tilbyder værktøjer fra små og præcise mobiltelefondele til så store som bildele. Vores værktøjer eksporteres hovedsageligt til U.S.A., Europa, Japan og Storbritannien. JasonMoulds diversificeringsstrategi og fuld service har vundet komplimenter fra kunder over hele verden.
Vores mission er at give vores kunder højkvalitets støbeprodukter og -tjenester. Vi bestræber os på at overgå vores kunders forventninger til priser, kvalitet og levering til tiden. For at nå vores mission, JasonMould:
- Forpligter sig til løbende at forbedre medarbejdernes færdigheder og effektivitet,
- Giver vores medarbejdere et rent og sikkert arbejdsmiljø,
- Opgraderer maskinteknologi og supportudstyr gennem et strengt vedligeholdelsesprogram, og
- Vedligeholder kundernes værktøj til dets højeste ydeevne
For mere om tilpasset producent af plaststøbningsprodukter,besøg venligst https://www.jasonmolding.com/
Forespørgsel Kontakt:
Kontaktperson: James Yuan
Firmanavn: JasonMould Industrial Company Limited
Adresse: LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong-provinsen, Kina
Telefon: 86-752-6682869
E-mail: [email protected]
Internet side: https://www.jasonmolding.com
