The price of the export mold will be more expensive, men det er dyrt, fordi standarden er anderledes. American Plastics Industry Association (SPIAN-102-78) inddeler formene i fem kategorier. Hver af disse fem typer forme har sine egne krav, og denne klassificering af forme kan kun anvendes på forme med 400 tons eller mindre sprøjtestøbemaskiner.
skimmelfremstilling
101 type
Cyklussen kan være op til 1 millioner gange for høj produktion. The best mold material is made, so the price is very high. The requirements are as follows:
(1) detailed mold design information is required.
(2) the mold hardness requirement is at least BHN280 (HRC 30).
(3) Mie surface (including upper and lower mold) must be at least within the hardness range of BHN450 (48RC). All other accessories such as slide block, inclined top and top press shall use hard tool steel.
(4) the ejector must be guided.
(5) the sideslip must be equipped with loss plates.
(6) a temperature controller may be installed on the upper mold, the lower mold, the slide block or the mold.
(7) In the life of the mold, because of the erosion of the cooling water pipeline, the quality of the product will decrease and the injection cycle will be increased. It is suggested that the embedded parts or formwork with cooling water should be treated as anti-erosion.
(8) all types of moulds shall be equipped with parting wire clamping mechanism.
102 type
Cyklussen kan være op til 500 thousand times to 1 million times. The products used for high output are made of good quality mold materials, and the price is high. The requirements are as follows:
(1) detailed mold design information is required.
(2) the mold hardness requirement is at least BHN280 (HRC30).
(3) the surface hardness of the upper and lower mold should be in the range of BHN540 (HRC 48). All other functional accessories should be heat treated.
(4) a temperature controller may be installed on the upper die, the lower die, the slide block or the mold.
(5) all types of moulds shall be equipped with parting wire clamping mechanism.
(6) the possibility or need of the following items depends on the consideration of the final production quantity. It is recommended that the same price list be confirmed.
103 type
The cycle can reach 500 thousand times. The price for medium production is reasonable. The requirements are as follows:
(1) detailed mold design information is required.
(2) the mold hardness requirement is at least BHN165 (HRC17).
(3) the upper and lower mold must have at least BHN280 (HRC30) hardness or above.
(4) all other accessories are free to choose.
104 type
The cycle can reach 100 thousand times. For low output products, the wear resistance of mold materials is not high, and the price is lower than the general reasonable level. The requirements are as follows:
(1) mold design information is recommended.
(2) the mold embryo can be soft steel or aluminum metal.
(3) the upper mold can be aluminum, soft steel or other identifiable materials.
(4) all other accessories are free to choose.
105 type
The cycle should not exceed 500 gange. It is used to produce the limited number of the first board, the price is very cheap. The requirements are as follows:
The mold structure may be die-casting material, epoxy resin or other material that provides sufficient strength to produce a minimum number of front plates.
JasonMould Industrial Company Limited, etableret i 2010, er en førende sprøjtestøbningsproducent i Kina. JasonMould er specialiseret i produktion af plastforme til husholdningsapparater, medicinsk udstyr, elektronisk udstyr, sikkerhedsudstyr samt overvågningssystem.
Virksomheden har overstået 15000 kvadratmeter fabrik. Med plastindsprøjtningsværktøjsafdelinger, der besidder forskelligt maskineri og ekspertise, JasonMould tilbyder værktøjer fra små og præcise mobiltelefondele til så store som bildele. Vores værktøjer eksporteres hovedsageligt til U.S.A., Europa, Japan og Storbritannien. JasonMoulds diversificeringsstrategi og fuld service har vundet komplimenter fra kunder over hele verden.
Vores mission er at give vores kunder højkvalitets støbeprodukter og -tjenester. Vi bestræber os på at overgå vores kunders forventninger til priser, kvalitet og levering til tiden. For at nå vores mission, JasonMould:
- Forpligter sig til løbende at forbedre medarbejdernes færdigheder og effektivitet,
- Giver vores medarbejdere et rent og sikkert arbejdsmiljø,
- Opgraderer maskinteknologi og supportudstyr gennem et strengt vedligeholdelsesprogram, og
- Vedligeholder kundernes værktøj til dets højeste ydeevne
For mere om tilpasset producent af plaststøbningsprodukter,besøg venligst https://www.jasonmolding.com/
Forespørgsel Kontakt:
Kontaktperson: James Yuan
Firmanavn: JasonMould Industrial Company Limited
Adresse: LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong-provinsen, Kina
Telefon: 86-752-6682869
E-mail: [email protected]
Internet side: https://www.jasonmolding.com
