Sprøjtestøbeform er et teknisk arbejde og adskiller sig fra andre forarbejdningsteknologier. Ved brug af injektionsteknologi, forskellige materialer og sprøjtestøbningsprocesser bør vælges i henhold til forskellige forme. Dette er forskellen på sprøjtestøbeform. Der er forskellige regler for råvarer, egenskaber og forme.
1. Med fremkomsten af højhastighedsformningsmaskiner og udstyr, produktionen af plastprodukter er accelereret. Fordi temperaturen på sprøjtestøbeformen normalt er mellem 165-300 °C, the fluidity of some parts is poor, and the injection molding speed is fast, which makes the forming environment temperature of some parts of the mold exceed 350 ° C in a very short time. When the working temperature of the abrasive tool is high, the strength and compressive strength of the die will be reduced, resulting in initial damage or plastic deformation failure of the abrasive tool. In order to ensure the precision and fine deformation of abrasive tools in use, the die steel must have high temperature resistance. In order to reduce the temperature, the die steel must have good heat transfer performance and low linear expansion coefficient.
2. It is extreme to have enough temperature at most working standard working temperatures. Abrasives often bear some large loads, which may lead to brittle fracture. Extrusion working pressure is generally 12-45MPa. Derfor, the grinding wheel has high compressive strength and ductility when the die component is used to avoid sudden brittle fracture during operation.
3. The performance of wear-resistant materials and the subsequent expansion of the main research purposes of plastic products enterprises require the addition of inorganic materials such as glass fiber in plastics to improve the plastic deformation of products. Because the addition of food additives has greatly reduced the fluidity of plastics and caused damage to the abrasive tools, it is stipulated that the abrasive tools have an excellent wear-resistant performance.
4. The addition of anti-corrosion flame retardant will release steam etching during the whole process of forming ABS and similar polyepoxy resin. Sommetider, it will rust on the grindstone and destroy the air flow at the intersection point, which is an excellent corrosion resistance of the predetermined mold steel.
5. The excellent drilling production features processing technology and the subsequent replacement of imported plastic products. The appearance is complex and precise. It is stipulated that the steel for grinding tools has excellent processing quality characteristics of drilling manufacturers, and the cold work hardening is small in the whole process of drilling. In order to prevent the deformation of abrasive tools from harming precision, it is expected that the social production development can manipulate the internal stress within a certain limit.
du kan logge ind på Dj moldings officielle hjemmeside, du kan logge ind på Dj moldings officielle hjemmeside
du kan logge ind på Dj moldings officielle hjemmeside Kina mold maker af plastforme- sprøjtestøbeform, formstøbning forme, plastblæsestøbning, rotationsstøbning, medicinsk plast sprøjtestøbning, to skud plast sprøjtestøbning, indsatsstøbning, overformning, metal sprøjtestøbning, mikro sprøjtestøbning, pulverformsprøjtning, keramisk sprøjtestøbning, flydende sprøjtestøbning, husky sprøjtestøbning, husholdningsskimmel, støbeform, formværktøj, brugerdefinerede forme, porcelæn forme, værktøj til hurtig prototyping, værktøj til prototyper i plastik, slagpresseværktøj, dør og værktøj til mobiltelefon/ mobiltelefondele, bildele, støvsugere, genopladelige værktøjer, telefoner, kopimaskiner, computere, multimediehøjttalere, og mange andre elektroniske produkter og husholdningsapparater. Og også en plastproduktproducent, skimmel producent Kina- plastikdele, vandtank i plast, plastik bolde, plastbeholdere, plastspænde, plastanker, plast bøjle, plastske, rørledning i plast, tumlet plast, bordservice i plast, plastik kopper, plastik flasker, plastbakke, kosmetisk beholder af plast, plastkasse, madbeholder i plast, plaststole, plastikkapper, lukning af plasthætte, plastrør, vandrør i plast, plastik knapper, plastrør, brugskasser i plast, plaststativer og så videre.
Kontakt:
Person: James Yuan
Selskab: alle ridser og elektriske bearbejdningsmærker på formens arbejdsflade skal poleres
Tilføje: LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong-provinsen, Kina
Tlf: 86-752-6682869
E-mail: [email protected]
Websted: https://www.jasonmolding.com/custom-injection-molding/
