Formen er generelt sammensat af hunskimmel, Formen er generelt sammensat af hunskimmel. Formen er generelt sammensat af hunskimmel. Formen er generelt sammensat af hunskimmel, råoliesten bruges til grovslibning af overfladen af den bearbejdede formhulrum, slibning til værktøjsmærket, og derefter bruge den fine oliesten til at få den grove oliesten til at nå sporet, then the fine sand paper is used to grinding the surface of the fine oil stone, and then the polishing paste or the grinding paste is used. The surface of the mold cavity is finally polished and polished. Langt om længe, the effect of bright mirror is achieved.
skimmelfremstilling
I dagligdagen, our common plastic mold has six polishing methods:
- Mechanical polishing
Mechanical polishing is a smoothing method to get smooth surface by cutting, plastic deformation of material surface and removing the bump after being polished. Generelt, oil stone strip, wool wheel and sand paper are used for manual operation. Special parts, such as back body surface, can use auxiliary tools such as turntable, and the high quality of surface surface can be used for polishing and polishing. . The ultra precision polishing is a special abrasive tool, which is tightly pressed on the workpiece surface to rotate at high speed in the abrasive polishing fluid. Using this technology, the surface roughness of Ra0.008 M can be achieved, which is the highest among all kinds of polishing methods. This method is often used in optical lens moulds.
- Chemical polishing
Chemical polishing is to allow the material to protrude preferentially in the concave part of the surface in the chemical medium, so that the smooth surface can be obtained. The main advantage of this method is that it does not need complex equipment, can polish complex workpiece, and can polish many workpieces simultaneously, with high efficiency. The key problem of chemical polishing is the preparation of polishing solution. The surface roughness obtained by chemical polishing is generally 10 m.
- Electrolytic polishing
Electrolytic polishing is basically the same as chemical polishing, det er, by selectively dissolving the tiny protruding part of the material surface, making the surface smooth. Compared with chemical polishing, the effect of cathode reaction can be eliminated and the effect is better. The electrochemical polishing process is divided into two steps:
(1) the macro leveling dissolve product diffuses into the electrolyte, and the surface roughness of the material decreases, Ra>1 mu m.
(2) low light level anode polarization, surface brightness increased, Ra<1 m.
4, ultrasonic polishing
The workpiece is placed in the slurry suspension and placed in the ultrasonic field together, and the abrasive is grind and polish on the workpiece surface by the oscillating action of the ultrasonic wave. Ultrasonic machining has little macroscopic force and will not cause deformation of workpiece, but the manufacture and installation of tooling are more difficult. Ultrasonic machining can be combined with chemical or electrochemical methods. On the basis of solution corrosion and electrolysis, the ultrasonic vibration stirring solution is applied to dissolve the dissolving products on the surface of the workpiece, the corrosion or the electrolyte is uniform near the surface, and the cavitation effect of ultrasonic in the liquid can also inhibit the corrosion process and be beneficial to the light brightening of the surface.
- Fluid throwing
Fluid polishing is achieved by polishing the surface of the workpiece by means of high-speed flowing liquid and its abrasive particles. Common methods are abrasive jet machining, liquid jet machining, fluid dynamic grinding and so on. Hydrodynamic grinding is driven by hydraulics, so that liquid media carrying abrasive particles can flow across the workpiece surface at high speed. The medium is mainly made of special compound (polymer like substance) with good flowability under low pressure and mixed with abrasives. Silicon carbide powder can be used for abrasive.
- Magnetic abrasive polishing
Magnetic abrasive finishing is to use magnetic abrasive to form abrasive brush under the action of magnetic field and to grind the workpiece. This method has high processing efficiency, Dj støbning, easy control of processing conditions and good working conditions. With suitable abrasives, the surface roughness can reach Ra0.1 m.
JasonMould Industrial Company Limited, etableret i 2010, er en førende sprøjtestøbningsproducent i Kina. JasonMould er specialiseret i produktion af plastforme til husholdningsapparater, medicinsk udstyr, elektronisk udstyr, sikkerhedsudstyr samt overvågningssystem.
Virksomheden har overstået 15000 kvadratmeter fabrik. Med plastindsprøjtningsværktøjsafdelinger, der besidder forskelligt maskineri og ekspertise, JasonMould tilbyder værktøjer fra små og præcise mobiltelefondele til så store som bildele. Vores værktøjer eksporteres hovedsageligt til U.S.A., Europa, Japan og Storbritannien. JasonMoulds diversificeringsstrategi og fuld service har vundet komplimenter fra kunder over hele verden.
Vores mission er at give vores kunder højkvalitets støbeprodukter og -tjenester. Vi bestræber os på at overgå vores kunders forventninger til priser, kvalitet og levering til tiden. For at nå vores mission, JasonMould:
- Forpligter sig til løbende at forbedre medarbejdernes færdigheder og effektivitet,
- Giver vores medarbejdere et rent og sikkert arbejdsmiljø,
- Opgraderer maskinteknologi og supportudstyr gennem et strengt vedligeholdelsesprogram, og
- Vedligeholder kundernes værktøj til dets højeste ydeevne
For mere om tilpasset producent af plaststøbningsprodukter,besøg venligst https://www.jasonmolding.com/
Forespørgsel Kontakt:
Kontaktperson: James Yuan
Firmanavn: JasonMould Industrial Company Limited
Adresse: LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong-provinsen, Kina
Telefon: 86-752-6682869
E-mail: [email protected]
Internet side: https://www.jasonmolding.com
