Den funktionelle struktur af plastformsystem består hovedsageligt af seks systemer: hældesystem, plastikken afkøles, dannende dele system, plastikken afkøles, styresystem og udkastsystem. Hældesystemet og formdelene er de dele, der er direkte i kontakt med plast, og ændre med plastik og produkter. De er de mest komplekse og mest udskiftelige dele i plastform. Det er nødvendigt at behandle delene med den højeste glathed og nøjagtighed.
- Portsystem:
The pouring system refers to the runner part of the plastic before it enters the cavity from the nozzle, including the main runner, the cold material hole, the shunt runner and the gate, etc.
- Molding parts system:
The forming part system refers to the combination of various parts which constitute the shape of the product, including the movable die, the fixed die, hulrummet (concave die), the core (slag), the forming rod and so on. Kernen danner den indre overflade af produktet, og hulrummet (dø) danner produktets ydre overfladeform. After closing, the core and cavity form the cavity of the die. I henhold til proces- og fremstillingskrav, sometimes the core and die are composed of several pieces, nogle gange laves de til en helhed. Inserts are used only in the parts that are easy to be damaged and difficult to be machined.
- Temperature control system:
Temperature control system is to meet the requirement of injection process for mould temperature. Temperature control system is needed to adjust the temperature of the mould. For injection moulds for thermoplastics, cooling systems are mainly designed to cool the moulds (or to heat the moulds). The common method of mould cooling is to set up cooling water passage in the mould and use circulating cooling water to take away the heat of the mould; besides using cooling water to pass hot water or hot oil, the heating of the mould can also install electric heating elements inside and around the mould.
- Udstødningssystem:
The exhaust system is set up to exclude the air in the cavity and the gas produced by the melting of plastic into the outside of the mould during the injection moulding process. Når udstødningen ikke er glat, the surface of the product will form bad gas marks (gasledninger), burning and so on. The exhaust system of the plastic mould is usually a groove-shaped air outlet opened in the mould to discharge the original type. The air in the chamber and the gas brought in by the melt.
When the melt is injected into the cavity, the air in the cavity and the gas brought in by the melt must be discharged out of the die through the exhaust port at the end of the material flow. Ellers, the product will have air holes, dårlig forbindelse, unsatisfactory filling, og selv den akkumulerede luft vil brænde produktet på grund af høj temperatur forårsaget af kompression. Generelt, the exhaust holes can be located at the end of the melt flow in the cavity or on the parting surface of the plastic mould.
The latter is a shallow groove with a depth of 0.03-0.2 mm and a width of 1.5-6 mm on the side of the die. Under injektionen, the exhaust holes will not have a lot of melt seepage, because the melt will cool and solidify there and block the passage. The opening position of the exhaust outlet should not be directed at the operator in order to prevent accidental ejection of molten material from hurting people. Ud over, the matching clearance between ejector rod and ejector hole, and the matching clearance between ejector block and ejector template and core can also be used to exhaust gas.
5, Vejledningssystem:
The guiding system is set up to ensure that the moving and fixing die can be accurately aligned in the die. The guiding parts must be set up in the die. In injection moulds, four groups of guide pillars and guide bushes are usually used to form guide parts. Sommetider, the internal and external cones which coincide with each other are set on the dynamic and fixed moulds to assist in positioning.
- Udkastsystem:
Ejection system generally includes: ejection pin, front and rear ejection pin plate, ejection pin guide rod, ejection pin reset spring, ejection pin plate locking screw and other parts. When the product is cooled in the mould, the front and rear die of the mould are separated and opened, and the plastic product and its condensate in the runner are pushed out or pulled out by the ejector pin driven by the ejector rod of the injection machine, so as to carry out the next injection molding working cycle.
JasonMould Industrial Company Limited, etableret i 2010, kvalitetsprodukter kan bare være en leg i produktionen producent af plastindsprøjtestøbning kvalitetsprodukter kan bare være en leg i produktionen. JasonMould er specialiseret i produktion af plastforme til husholdningsapparater, medicinsk udstyr, elektronisk udstyr, sikkerhedsudstyr samt overvågningssystem.
Virksomheden har overstået 15000 kvadratmeter fabrik. Med plastindsprøjtningsværktøjsafdelinger, der besidder forskelligt maskineri og ekspertise, JasonMould tilbyder værktøjer fra små og præcise mobiltelefondele til så store som bildele. Vores værktøjer eksporteres hovedsageligt til U.S.A., Europa, Japan og Storbritannien. JasonMoulds diversificeringsstrategi og fuld service har vundet komplimenter fra kunder over hele verden.
Vores mission er at give vores kunder højkvalitets støbeprodukter og -tjenester. Vi bestræber os på at overgå vores kunders forventninger til priser, kvalitet og levering til tiden. For at nå vores mission, JasonMould:
- Forpligter sig til løbende at forbedre medarbejdernes færdigheder og effektivitet,
- Giver vores medarbejdere et rent og sikkert arbejdsmiljø,
- Opgraderer maskinteknologi og supportudstyr gennem et strengt vedligeholdelsesprogram, og
- Vedligeholder kundernes værktøj til dets højeste ydeevne
For mere om tilpasset producent af plaststøbningsprodukter,besøg venligst https://www.jasonmolding.com/
Forespørgsel Kontakt:
Kontaktperson: James Yuan
Firmanavn: JasonMould Industrial Company Limited
Adresse: LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong-provinsen, Kina
Telefon: 86-752-6682869
E-mail: [email protected]
Internet side: https://www.jasonmolding.com
