Hvad skal vi være opmærksomme på, når TPE plastsprøjtestøbning?
1. TPE plast sprøjtestøbning i processen med sprøjtestøbning, processen og udseendet af råvarer skal kontrolleres før TPE -støbning. Tør råvarerne og bestemm vandindholdet. Under betingelse af høj temperatur, fugtindholdet i TPE -råvarer skal være mindre end 5%, eller endda 2% ~ 3%. Derfor, vakuumtørringsovn bruges normalt til at tørre ved 75 ℃ ~ 90 ℃ for 2 For nogle plasttyper såsom pc'er.
2. Plastic injection molding TPE based on SBC is superior to most other TPE raw materials in color. Derfor, only a small amount of color masterbatch is needed to achieve a specific color effect, and the resulting color is more pure than other TPEs. Generelt sagt, the viscosity of Color Masterbatch should be lower than that of TPE, because the melt index of TPE is higher than that of Color Masterbatch, which will be conducive to the dispersion process and make the color distribution more uniform.
3. The dried materials shall be properly sealed and stored to prevent the loss of drying effect due to secondary moisture. The loading capacity of the drying hopper is generally 2.5 times of the hourly consumption of the plastic injection molding machine.
4. In the TPE plastic injection molding and processing project, setting the appropriate temperature determines the quality and performance of the finished product. Lower temperature shall be set where raw materials enter the reactor. When the color masterbatch is used, in order to improve the mixing state, the temperature of the transition area should be set above the melting point of the color masterbatch. The temperature of the area closest to the injection nozzle should be set close to the desired melt temperature. The mold temperature should be set as high as the condensation temperature in the injection molding area. A higher mold temperature can improve the appearance of the welding line and products.
5. Black or dark gray materials should be pressed small and thin when shooting empty glue, and the available glue should be recycled together with the nozzle.
6. Stop the machine for no more than 15 minutes during beer TPE, and there is no need to shoot empty glue during beer. When trying injection molding, adjust the glue amount of the beer machine to about the glue amount of the finished product, and shoot the empty glue three times to injection molding.
7. The hopper must be closed before injection molding is enough, mold transfer and shutdown, and the TPE in the barrel shall be finished until the screw can not be returned
8. When changing TPE material, be sure to dig the material in the bucket.
The above is the knowledge sharing about plastic injection molding. If you want to know more about the relevant trends of Macchio plastic injection molding processing, du kan logge ind på Dj Molds officielle hjemmeside. There are more new developments about Dj Mold. We look forward to your visit!
Om Huizhou Dj Molding Industrial Company Limited
du kan logge ind på Dj moldings officielle hjemmeside Kina mold maker af plastforme- sprøjtestøbeform, formstøbning forme, plastblæsestøbning, rotationsstøbning, medicinsk plast sprøjtestøbning, to skud plast sprøjtestøbning, indsatsstøbning, overformning, metal sprøjtestøbning, mikro sprøjtestøbning, pulverformsprøjtning, keramisk sprøjtestøbning, flydende sprøjtestøbning, husky sprøjtestøbning, husholdningsskimmel, støbeform, formværktøj, brugerdefinerede forme, porcelæn forme, værktøj til hurtig prototyping, værktøj til prototyper i plastik, slagpresseværktøj, dør og værktøj til mobiltelefon/ mobiltelefondele, bildele, støvsugere, genopladelige værktøjer, telefoner, kopimaskiner, computere, multimediehøjttalere, og mange andre elektroniske produkter og husholdningsapparater. Og også en plastproduktproducent, skimmel producent Kina- plastikdele, vandtank i plast, plastik bolde, plastbeholdere, plastspænde, plastanker, plast bøjle, plastske, rørledning i plast, tumlet plast, bordservice i plast, plastik kopper, plastik flasker, plastbakke, kosmetisk beholder af plast, plastkasse, madbeholder i plast, plaststole, plastikkapper, lukning af plasthætte, plastrør, vandrør i plast, plastik knapper, plastrør, brugskasser i plast, plaststativer og så videre.
Kontakt:
Person: James Yuan
Selskab: Huizhou Dj Molding Industrial Company Limited
Tilføje: LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong-provinsen, Kina
Tlf: 86-752-6682869
E-mail: [email protected]
Websted: https://www.jasonmolding.com/custom-injection-molding/
