JasonMould Industrial Company Limited adalah seorang profesional perusahaan cetakan injeksi plastik cina untuk Layanan Prototipe Cepat Pencetakan 3D, layanan penggilingan CNC presisi dan kustom layanan permesinan CNC, cetakan injeksi plastik khusus atau perusahaan cetakan dengan pengembangan dan pembuatan cetakan dan cetakan.
Hari ini kami akan memberi tahu Anda pengetahuan tentang proses pencetakan injeksi.
Mesin injeksi mengambil butiran plastik- bahan baku, memanaskannya sampai cair, dan kemudian menyuntikkan bahan plastik cair ke dalam cetakan. Laras di injektor berisi sekrup atau auger. The heater bands around the outside raise the temperature to melt the plastic to the desired level. The plastic injection molding process usually produces large numbers of workpieces of high quality at high efficiency.
Injector basically is a machine for raising plastic temperature to a point where it will flow under pressure, for allowing the plastic to cavity and solidify in the mold, which the machine keeps closed, and for opening the mold to eject the solid plastic workpiece.
The plastic injection molding process is as follow:
- Raising the temperature of the plastic into a viscous flow state where it will flow under pressure. This is done in the barrel of injector both by heating and by grinding down the solid granular to form a uniform viscosity or melted at an elevated temperature. The inside of barrel is equipped with reciprocating screw or a ram. This operation of the process us referred to as the plasticizing of the material.
- Conveying the molten plastic material into the cavity of mold. The liquid or molten plastic from the barrel of injector is transferred or forced through various flow channels or runners into the cavities of the mold, and to be formed into the desired workpiece.
- Cooling and solidifying the molten plastic in the mold. The mold will keep closed, which is to solidify the plastic and freeze it permanently into the shaped desired for thermoplastics. To thermoset plastic material, the third operation is to keep on heating the mold so that the plastic reacts with cross-linkage to form the workpiece.
- Open the mold and eject the workpiece from the mold.
Plastic material in the form of granules is melted until soft enough to be injected under pressure to fill a mold. Hasilnya adalah bentuknya persis disalin. Once the plastic molding has cooled sufficiently to harden the mold opens releasing the workpiece. The whole injection molding process then repeats.
Tentang JasonMould Industrial Company Limited
Jasonmould adalah produsen cetakan plastik- cetakan injeksi, cetakan die casting, cetakan tiup plastik, cetakan rotasi, medis cetakan injeksi plastik, dua tembakan cetakan injeksi plastik, masukkan cetakan, overmolding, cetakan injeksi logam, cetakan injeksi mikro, cetakan injeksi bubuk, cetakan injeksi keramik, cetakan injeksi cair, cetakan injeksi husky, cetakan rumah tangga, pengecoran cetakan, alat cetakan mati, cetakan khusus, cetakan cina, perkakas prototipe cepat rapid, perkakas prototipe plastik plastic, perkakas tekan pukulan, mati dan perkakas untuk bagian ponsel / ponsel cell, bagian otomotif, penyedot debu, alat isi ulang, telepon, mesin fotokopi, komputer, speaker multimedia, dan banyak produk elektronik dan peralatan rumah tangga lainnya. Dan juga produsen produk plastik- bagian-bagian yang terbuat dari plastik, tangki air plastik, bola plastik, wadah plastik, gesper plastik, jangkar plastik, gantungan plastik, sendok plastik, pemasangan pipa plastik, gelas plastik, peralatan makan plastik, gelas plastik, botol-botol plastik, nampan plastik, wadah kosmetik plastik, kotak plastik, wadah makanan plastik, kursi plastik, tutup plastik, penutupan tutup plastik, tabung plastik, pipa air plastik, kenop plastik, tabung plastik, kotak utilitas plastik, rak plastik dan sebagainya.
Kontak:
Orang: James Yuan
Perusahaan: JasonMould Industrial Company Limited
Menambahkan: Desa LongGang,Kota LongXi,Kabupaten BoLuo,Kota HuiZhou,Provinsi Guangdong, Cina
Telp: 86-752-6682869
Surel: [email protected]
Situs:https://www.jasonmolding.com/custom-injection-molding/
