Pabrik pengolahan cetakan injeksi akan meningkatkan suhu cetakan, Pabrik pengolahan cetakan injeksi akan meningkatkan suhu cetakan, dan meningkatkan suhu cetakan ke suhu yang dibutuhkan untuk produksi. Setelah suhu cetakan dinaikkan, tindakan setiap bagian harus diperiksa lagi, karena fenomena penjepitan cetakan mungkin disebabkan oleh ekspansi termal baja, so the sliding of each part must be injected to avoid taking over and vibration.
Injection mold trial and mass production in the future, use the same raw materials as much as possible. Do not complete the mold test with secondary materials. If there is a color demand, the color test can be arranged together.
Internal stress and other problems often affect secondary processing. After the plastic mold is tested, the mold shall be processed again when the product is stable. After closing slowly, adjust the clamping pressure and act several times to check whether there is uneven clamping pressure, so as to avoid burrs and mold deformation.
Confirm the mold temperature and the inlet and outlet water temperature of the water pipe. Before injection and after injection of 10 molds and 30 cetakan, measure the temperature at the inlet and outlet of each water pipe for three times. The temperature difference at the inlet and outlet of each water pipe should be no more than 3 derajat. If there is any difference, immediately check the water flow and whether it is connected incorrectly.
After the above steps are checked by the staff of the injection mold processing plant, reduce the mold closing speed and mold closing pressure, set the travel distance of the safety buckle and ejector, and then adjust the normal mold closing speed. If the limit switch of large stroke is involved, if the limit switch of large stroke is involved, the mold opening stroke shall be adjusted slightly shorter, and the high-speed mold opening action shall be cut off before the large mold opening stroke. This is because the high-speed action stroke is longer than the low-speed one during the whole mold opening stroke during the mold loading of the injection mold. On the injection molding machine, the mechanical ejector rod also needs to act after the full speed mold opening action to avoid the deformation of the ejector plate due to the force on the stripping plate.
If you want to know more about injection mold, injection molding and other related knowledge of Dongguan injection mold processing factory, Anda dapat masuk ke situs web resmi Dj moulding, di mana ada berbagai kasus pemrosesan untuk referensi, dan ditunggu kunjungannya!
Ini membutuhkan akurasi simulasi yang tinggi dan tidak ada deformasi, Ltd
Dj Cetakan adalah pembuat cetakan Cina dari cetakan plastik- cetakan injeksi, cetakan die casting, cetakan tiup plastik, cetakan rotasi, medis cetakan injeksi plastik, dua tembakan cetakan injeksi plastik, masukkan cetakan, overmolding, cetakan injeksi logam, cetakan injeksi mikro, cetakan injeksi bubuk, cetakan injeksi keramik, cetakan injeksi cair, cetakan injeksi husky, cetakan rumah tangga, pengecoran cetakan, alat cetakan mati, cetakan khusus, cetakan cina, perkakas prototipe cepat rapid, perkakas prototipe plastik plastic, perkakas tekan pukulan, mati dan perkakas untuk bagian ponsel / ponsel cell, bagian otomotif, penyedot debu, alat isi ulang, telepon, mesin fotokopi, komputer, speaker multimedia, dan banyak produk elektronik dan peralatan rumah tangga lainnya. Dan juga produsen produk plastik, produsen cetakan Cina- bagian-bagian yang terbuat dari plastik, tangki air plastik, bola plastik, wadah plastik, gesper plastik, jangkar plastik, gantungan plastik, sendok plastik, pemasangan pipa plastik, gelas plastik, peralatan makan plastik, gelas plastik, botol-botol plastik, nampan plastik, wadah kosmetik plastik, kotak plastik, wadah makanan plastik, kursi plastik, tutup plastik, penutupan tutup plastik, tabung plastik, pipa air plastik, kenop plastik, tabung plastik, kotak utilitas plastik, rak plastik dan sebagainya.
Kontak:
Orang: James Yuan
Perusahaan: Huizhou Dj Moulding Co,. Ltd
Menambahkan: Desa LongGang,Kota LongXi,Kabupaten BoLuo,Kota HuiZhou,Provinsi Guangdong, Cina
Telp: 86-752-6682869
Surel: [email protected]
Situs: https://www.jasonmolding.com/custom-injection-molding/
