Nedir “optimize etme” enjeksiyon kalıplama işlemi ortalama? Genel konuşma, bu, değerli ve etkili süreç hedeflerine ulaşmak için sürecin dikkatli bir şekilde kontrol edilmesi gerektiği anlamına gelir.. Bunu yapmak için beş tekniğe bir göz atalım.
1. İmalat numuneleri ile kalite kontrol.
Tabii ki, quality control is the key part of the whole molding production process, which is usually carried out in the later stage of production, while the quality control of sample parts is different. In order to pursue the optimization of injection molding process, sample parts can play a key role. They don’t have the risk of full production testing and optimization. Ek olarak, they can have a better understanding of the process and how the machine was run in a more controlled environment.
By evaluating the sample production process of limited parts, we can directly understand the whole process, evaluate the part quality, injection volume, and the melting temperature of the actual batch of resin on hand. Results that can be obtained through sample runs and powerful quality control reviews often make up for the time and money you spend.
2. Mold evaluation and testing.
Checking the function of the mold with the required materials can also generate significant benefits in optimizing the molding process. A wide variety of resin materials and formulations are available, which means that the subtle differences between viscosity, melt temperature, kalıp sıcaklığı, vesaire. can be added together, resulting in cumulative fluctuations and changes in the molding process, resulting in parts scrapping and low process efficiency. Some key points of mold testing are shot test, filling rate and pattern, pressure curve evaluation and so on.
3. Test and adjust the mold and injection molding process.
After obtaining the available information from mold testing and sample part quality control, fine tuning can be made, which can greatly benefit process optimization and efficiency. Örneğin, if you encounter short time problems or inconsistent fill times, you can adjust the mold design and layout to optimize for these problems. If the mold temperature is inconsistent or out of the acceptable range, it can be adjusted to obtain a better heating and cooling time.
4. Process parameters and performance range.
From machinery to molds to resins, every part of the injection molding process has an acceptable performance range. When you make incremental (or significant) adjustments to process components using the tangible results of the test, the results can begin to accumulate until you have a sense of profit, results, and value that you can provide to customers.
5. Create or follow the given experimental design process.
Repetitive processes will produce reliable and acceptable parts rates that can be easily troubleshooting and enable the operator to understand as much as possible how the process works. Repeatability is also a key factor to keep in mind when testing to optimize the injection molding process.
Experimental design essentially means that you are performing tests in a planned, structured, and documented manner. This means that any violations or other problems found can be easily traced back to their specific sources.
JasonMould Industrial Company Limited Hakkında
Jasonmould bir Çin kalıp üreticisi plastik kalıpların- enjeksiyon kalıbı, döküm kalıpları, plastik şişirme, rotasyonel kalıplama, tıbbi plastik enjeksiyon kalıplama, iki atış plastik enjeksiyon kalıplama, ekleme kalıplama, aşırı kalıplama, metal enjeksiyon kalıplama, mikro enjeksiyon kalıplama, toz enjeksiyon kalıplama, seramik enjeksiyon kalıplama, sıvı enjeksiyon kalıplama, husky enjeksiyon kalıplama, ev kalıp, döküm kalıbı, kalıp aracı, özel kalıplar, Çin kalıpları, hızlı prototipleme araçları, plastik prototipleme araçları, zımba pres takımı, cep telefonu/cep telefonu parçaları için kalıp ve takımlar, Otomotiv parçaları, elektrikli süpürgeler, şarj edilebilir aletler, telefonlar, fotokopi makineleri, bilgisayarlar, multimedya hoparlörler, ve diğer birçok elektronik ürün ve ev aletleri. Ve ayrıca bir plastik ürün üreticisi, kalıp üreticisi Çin- plastik parçalar, plastik su deposu, plastik toplar, plastik konteynırlar, plastik toka, plastik çapa, plastik askı, plastik kaşık, plastik boru bağlantı parçası, plastik takla, plastik sofra takımı, plastik kaplar, plastik şişeler, plastik tepsi, plastik kozmetik konteyner, plastik kasa, plastik yemek kabı, plastik sandalyeler, plastik kapaklar, plastik kapak kapatma, plastik borular, plastik su boruları, plastik düğmeler, plastik boru, plastik yardımcı kutular, plastik raflar ve benzeri.
İletişim:
Kişi: James Yuan
şirket: JasonMould Sanayi Limited Şirketi
Ekle: Uzun Çete Köyü,LongXi Kasabası,BoLuo İlçe,HuiZhou Şehri,Guangdong Eyaleti, Çin
telefon: 86-752-6682869
E-posta: [email protected]
Alan: https://www.jasonmolding.com/custom-injection-molding/
