Sản xuất khuôn ép và sản xuất nhựa
Ngay từ những năm 1860, mọi người đang học cách chế tạo và sử dụng chất dẻo. Do tính mềm dẻo khi ấm và khả năng giữ dáng khi nguội, nhựa giúp tạo ra sản phẩm mới dễ dàng hơn. Không may, it was difficult to produce affordable, quality plastics that did not warp or break.
As manufacturers experimented with plastic polymers, small items became easier to produce in greater quantities. But it wasn’t until the 1940s, when demand for large amounts of inexpensive, mass-produced plastics rose, that the injection mold manufacturing industry really took off.
What Is Injection Mold Manufacturing?
Injection mold manufacturing is a way to mass-produce products and product components for many different industries. Hôm nay, many mass-produced plastics are made using this process. Common examples of plastic products that the everyday consumer uses include combs and buttons. But more complex items are made too. Everything from vehicle parts to medical devices are often mass-produced using this process.
How Does It Work?
The idea is simple: Create a mold that can be used again and again to create exact replicas of the desired product. Originally associated with plastics, other materials including metal and glass are now used in this process.
The process is fairly simple as well. After an industrial engineer designs the product, a moldmaker creates a mold based on engineering specifications. The mold itself is usually made of steel or aluminum and attached to a press that holds it in place until the product is set.
To make the actual product, the plastic or other material is heated until it is pliable enough to be forced into the mold. Once in the mold, the press exerts force and holds the molding in place until the product sets and cools. The entire production is so perfectly engineered that there is usually no need to perform any additional work on the piece once it comes out of the mold.
The Impact of Injection Mold Manufacturing Today
Injection mold manufacturing has resulted in reduced cost in many industries. The ability to mass-produce items using a single design saves companies time and money over making each item or component at an individual level. This method of manufacturing has allowed companies to cut down on wasted materials while producing large amounts of the same item quickly and accurately.
The process has also proven highly useful in the recycling industry. Since the plastics and polymers must be melted down before they can be injected into the cast, used products, rejected parts and excess scrap parts can be melted down and reused in new products.
Although this type of manufacturing has many benefits, it is not suitable for every business. The start-up costs are high and custom-engineered casts are needed for every product that is created. They are best for companies that routinely produce large amounts of the same product over and over again because as production quantities rise, the cost of production per item decreases. For businesses that do not produce items on a large enough scale, the time and labour-saving benefits may not outweigh the costs.
Bởi Nhà sản xuất khuôn Trung Quốc
Giới thiệu về Công ty TNHH Công nghiệp JasonMould:
JasonMould là một trong những người giỏi nhất nhà sản xuất ép nhựa cung cấp các dịch vụ tuyệt vời cho khách hàng của họ khi sản xuất các công cụ đúc tiên tiến. Họ xuất khẩu các công cụ của mình sang nhiều nơi khác nhau trên thế giới và đã trở thành một trong những tên tuổi nổi tiếng nhất trong lĩnh vực công nghiệp.
Yêu cầu Liên hệ:
Người liên hệ: James Yuan
Tên công ty: Công ty TNHH Công nghiệp JasonMould
Địa chỉ: Làng LongGang,Thị trấn LongXi,Hạt BoLuo,Thành phố Huệ Châu,Tỉnh Quảng Đông, Trung Quốc
Điện thoại: 86-752-6682869
E-mail: [email protected]
Trang mạng: https://www.jasonmolding.com
