JasonMould Industrial Company Limited er professionel Kina plast sprøjtestøbning selskab til 3D Printing Rapid Prototyping Service, præcision CNC fræsning service og brugerdefineret CNC -bearbejdningstjenester, specialfremstillet plastindsprøjtnings- eller støbefirma med udvikling og fremstilling af form og matricer.
I dag vil vi fortælle dig viden om sprøjtestøbningsprocessen.
Injektionsmaskinen tager plastgranulat- Råmateriale, opvarmer dem, indtil de er smeltede, og sprøjter derefter smeltet plastmateriale ind i formen. Tromlen i injektoren indeholder en skrue eller snegl. The heater bands around the outside raise the temperature to melt the plastic to the desired level. The plastic injection molding process usually produces large numbers of workpieces of high quality at high efficiency.
Injector basically is a machine for raising plastic temperature to a point where it will flow under pressure, for allowing the plastic to cavity and solidify in the mold, which the machine keeps closed, and for opening the mold to eject the solid plastic workpiece.
The plastic injection molding process is as follow:
- Raising the temperature of the plastic into a viscous flow state where it will flow under pressure. This is done in the barrel of injector both by heating and by grinding down the solid granular to form a uniform viscosity or melted at an elevated temperature. The inside of barrel is equipped with reciprocating screw or a ram. This operation of the process us referred to as the plasticizing of the material.
- Conveying the molten plastic material into the cavity of mold. The liquid or molten plastic from the barrel of injector is transferred or forced through various flow channels or runners into the cavities of the mold, and to be formed into the desired workpiece.
- Cooling and solidifying the molten plastic in the mold. The mold will keep closed, which is to solidify the plastic and freeze it permanently into the shaped desired for thermoplastics. To thermoset plastic material, the third operation is to keep on heating the mold so that the plastic reacts with cross-linkage to form the workpiece.
- Open the mold and eject the workpiece from the mold.
Plastic material in the form of granules is melted until soft enough to be injected under pressure to fill a mold. Resultatet er, at formen er nøjagtigt kopieret. Once the plastic molding has cooled sufficiently to harden the mold opens releasing the workpiece. The whole injection molding process then repeats.
Om JasonMould Industrial Company Limited
Jasonmould er producent af plastforme- sprøjtestøbeform, formstøbning forme, plastblæsestøbning, rotationsstøbning, medicinsk plast sprøjtestøbning, to skud plast sprøjtestøbning, indsatsstøbning, overformning, metal sprøjtestøbning, mikro sprøjtestøbning, pulverformsprøjtning, keramisk sprøjtestøbning, flydende sprøjtestøbning, husky sprøjtestøbning, husholdningsskimmel, støbeform, formværktøj, brugerdefinerede forme, porcelæn forme, værktøj til hurtig prototyping, værktøj til prototyper i plastik, slagpresseværktøj, dør og værktøj til mobiltelefon/ mobiltelefondele, bildele, støvsugere, genopladelige værktøjer, telefoner, kopimaskiner, computere, multimediehøjttalere, og mange andre elektroniske produkter og husholdningsapparater. Og også en plastproduktproducent- plastikdele, vandtank i plast, plastik bolde, plastbeholdere, plastspænde, plastanker, plast bøjle, plastske, rørledning i plast, tumlet plast, bordservice i plast, plastik kopper, plastik flasker, plastbakke, kosmetisk beholder af plast, plastkasse, madbeholder i plast, plaststole, plastikkapper, lukning af plasthætte, plastrør, vandrør i plast, plastik knapper, plastrør, brugskasser i plast, plaststativer og så videre.
Kontakt:
Person: James Yuan
Selskab: JasonMould Industrial Company Limited
Tilføje: LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong-provinsen, Kina
Tlf: 86-752-6682869
E-mail: [email protected]
Websted:https://www.jasonmolding.com/custom-injection-molding/
