1. Positioneringsringens ydre diameter er på linje med maskinens positioneringshul.
2. Den maksimale åbningsafstand: når formen er helt åben, åbningsafstanden skal være mindre end maskinens maksimale åbningsafstand. If the opening distance of the mold is greater than the distance of the machine, the shorter outer pull rod can be replaced. Imidlertid, the shorter outer pull rod of some products can not guarantee the smooth demoulding and even lead to product bumping and other defects.
3. To confirm the maximum and minimum die thickness, the mold height must be greater than the minimum die thickness of the machine before installing the mold.
4. The outer diameter of ejector ejector should be smaller than the inner diameter of ejector hole. The effective length of ejection, det er, the length from the plane of the machine board to the time of complete ejection, should be greater than the distance of ejection when the product is demoulded smoothly. The number and position of ejector pins should be consistent with the mold.
5. The injection nozzle of the mould should be larger than the machine nozzle, and it is better to be larger than 2mm in general. In order to demould the sprue smoothly, the nozzle diameter of the mould is slightly larger than that of the machine nozzle.
8. Metering stroke: the machine has a certain metering stroke. When confirming, the required metering stroke is calculated according to the weight or volume of the product. Generelt, it is better to control it at more than 20% and less than 70%. Vi ved alle, at alle kunder kan lide forme med flere hulrum, it can also be produced when it is small or large, but it has a negative impact on both the product and the machine.
Om JasonMould Industrial Company Limited
Jasonmould er en Kina mold maker af plastforme- sprøjtestøbeform, formstøbning forme, plastblæsestøbning, rotationsstøbning, medicinsk plast sprøjtestøbning, to skud plast sprøjtestøbning, indsatsstøbning, overformning, metal sprøjtestøbning, mikro sprøjtestøbning, pulverformsprøjtning, keramisk sprøjtestøbning, flydende sprøjtestøbning, husky sprøjtestøbning, husholdningsskimmel, støbeform, formværktøj, brugerdefinerede forme, porcelæn forme, værktøj til hurtig prototyping, værktøj til prototyper i plastik, slagpresseværktøj, dør og værktøj til mobiltelefon/ mobiltelefondele, bildele, støvsugere, genopladelige værktøjer, telefoner, kopimaskiner, computere, multimediehøjttalere, og mange andre elektroniske produkter og husholdningsapparater. Og også en plastproduktproducent, skimmel producent Kina- plastikdele, vandtank i plast, plastik bolde, plastbeholdere, plastspænde, plastanker, plast bøjle, plastske, rørledning i plast, tumlet plast, bordservice i plast, plastik kopper, plastik flasker, plastbakke, kosmetisk beholder af plast, plastkasse, madbeholder i plast, plaststole, plastikkapper, lukning af plasthætte, plastrør, vandrør i plast, plastik knapper, plastrør, brugskasser i plast, plaststativer og så videre.
Kontakt:
Person: James Yuan
Selskab: JasonMould Industrial Company Limited
Tilføje: LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong-provinsen, Kina
Tlf: 86-752-6682869
E-mail: [email protected]
Websted: https://www.jasonmolding.com/custom-injection-molding/
