Pengacuan sisip adalah kaedah pengacuan untuk produk bersepadu dengan menyuntik resin ke dalam sisipan berbeza yang telah disediakan di dalam acuan, dan bahan cantuman diikat dan dipadatkan dengan sisipan.
Pengacuan SERT keluar pada substrat merujuk kepada kaedah memasukkan bahagian pengacuan suntikan pada permukaan plat logam.
Kedua-dua kaedah pengacuan pada asasnya adalah sama. Ciri-cirinya adalah seperti berikut.
1. Komposit kebolehbentukan resin, sifat lenturan dan ketegaran logam, strength and heat resistance can make a complex and exquisite metal plastic integrated product.
2. terutamanya, the combination of insulation and metal conductivity of resin can meet the basic functions of electrical products.
3. The pre forming combination of multiple inserts makes the post engineering of product unit combination more reasonable.
4. The embedded products are not limited to metal, but also have cloth, kertas, wayar, plastik, kaca, kayu, coil, electrical parts and so on.
5. For the rigid molding products and the bending elastic molding products on the rubber sealing pad, the integrated products are made by injection molding on the base, which can save the complicated operation of arranging the sealing rings, making the automatic combination of the later process easier.
6. Because of the fusion of the material and metal insert, compared with the press in molding method, the metal insert gap can be designed to be narrower.
7. The proper resin and forming conditions are selected, itu dia, for products (such as glass, coil, electrical parts, dan lain-lain.) which are easy to be pressed and damaged, they can also be sealed and fixed by resin.
8. The inserts can also be completely sealed into the resin by selecting the appropriate mold construction.
9. After the insert is formed, the product with hollow groove can be made after core removal hole treatment.
10. The combination of vertical injection molding machine, manipulator, and whole line of insert products can realize automatic production in most of the embedded parts forming engineering.
Considerations for design and selection of automatic insert forming system
1. The metal insert is easy to produce uneven shrinkage. The limit test of shape and dimension precision of important parts should be done in advance.
2. The metal insert is easy to deform and shift during injection. The mold composition and the design of mold shape which is easy to maintain the metal insert should be fully considered. For the products whose shape cannot be changed, the prior test is indispensable.
3. When the conveyor is used for the separation of metal inserts, the contact between metal inserts and the insert and vibration ball will cause slight damage to the surface of the insert, which will affect the product quality. The allowable limit range of quality shall be confirmed in advance.
4. The serration, warpage, material thickness difference, diameter difference and thickness difference caused by gold deposit processing should be measured in advance. Atas dasar ini, the design of the matching selection and mold structure of the automation device is carried out.
5. The predictable problems restricting mold construction such as gate position and forming period are solved in advance or corresponding improvement measures are available.
6. It shall be confirmed whether the metal insert needs preheating or drying treatment. The purpose is to ensure the quality of products and the stability of forming.
7. All kinds of testing devices set in the mold are used to ensure the stable forming action under the influence of the mold heating, force, vibration and other environmental conditions. It should be confirmed whether to use it.
8. In order to avoid the small pieces of metal inserts and molding products piled in the mold cavity, the air blowing device can be assembled if necessary.
9. Because of the high investment price of system equipment, it is necessary to consider whether the production capacity of equipment can be ensured before using. When using special machine, it is necessary to ensure that the products can be continuously produced without form updating in several years.
10. When using general machine, it is necessary to confirm how many kinds of products and few batch inserts have combined production. If the overall production cannot be guaranteed in large quantities, it is difficult to recover the fixed assets of each product. Tekanan dalaman acuan yang tidak mencukupi juga akan berlaku, it is necessary to replace some devices to meet the requirements of variety renewal in a certain range.
11. The factors and technical decisions such as the accuracy of metal inserts, the shape of inserts, whether the mold is conducive to the shape of the inserts and the shape of the molded parts, dan lain-lain., which determine the molding rate, production and forming cost conditions of the inserts.
12. The key to the automatic insert forming system is the effective combination of injection machine, mold and automation device and how to play its functions in a short time. Please consult with the manufacturer with considerable practical experience to choose
Pengacuan sisip adalah kaedah pengacuan untuk produk bersepadu dengan menyuntik resin ke dalam sisipan berbeza yang telah disediakan di dalam acuan, dan bahan cantuman diikat dan dipadatkan dengan sisipan.
Pengacuan SERT keluar pada substrat merujuk kepada kaedah memasukkan bahagian pengacuan suntikan pada permukaan plat logam.
Kedua-dua kaedah pengacuan pada asasnya adalah sama. Ciri-cirinya adalah seperti berikut.
1. Komposit kebolehbentukan resin, sifat lenturan dan ketegaran logam, strength and heat resistance can make a complex and exquisite metal plastic integrated product.
2. terutamanya, the combination of insulation and metal conductivity of resin can meet the basic functions of electrical products.
3. The pre forming combination of multiple inserts makes the post engineering of product unit combination more reasonable.
4. The embedded products are not limited to metal, but also have cloth, kertas, wayar, plastik, kaca, kayu, coil, electrical parts and so on.
5. For the rigid molding products and the bending elastic molding products on the rubber sealing pad, the integrated products are made by injection molding on the base, which can save the complicated operation of arranging the sealing rings, making the automatic combination of the later process easier.
6. Because of the fusion of the material and metal insert, compared with the press in molding method, the metal insert gap can be designed to be narrower.
7. The proper resin and forming conditions are selected, itu dia, for products (such as glass, coil, electrical parts, dan lain-lain.) which are easy to be pressed and damaged, they can also be sealed and fixed by resin.
8. The inserts can also be completely sealed into the resin by selecting the appropriate mold construction.
9. After the insert is formed, the product with hollow groove can be made after core removal hole treatment.
10. The combination of vertical injection molding machine, manipulator, and whole line of insert products can realize automatic production in most of the embedded parts forming engineering.
Considerations for design and selection of automatic insert forming system
1. The metal insert is easy to produce uneven shrinkage. The limit test of shape and dimension precision of important parts should be done in advance.
2. The metal insert is easy to deform and shift during injection. The mold composition and the design of mold shape which is easy to maintain the metal insert should be fully considered. For the products whose shape cannot be changed, the prior test is indispensable.
3. When the conveyor is used for the separation of metal inserts, the contact between metal inserts and the insert and vibration ball will cause slight damage to the surface of the insert, which will affect the product quality. The allowable limit range of quality shall be confirmed in advance.
4. The serration, warpage, material thickness difference, diameter difference and thickness difference caused by gold deposit processing should be measured in advance. Atas dasar ini, the design of the matching selection and mold structure of the automation device is carried out.
5. The predictable problems restricting mold construction such as gate position and forming period are solved in advance or corresponding improvement measures are available.
6. It shall be confirmed whether the metal insert needs preheating or drying treatment. The purpose is to ensure the quality of products and the stability of forming.
7. All kinds of testing devices set in the mold are used to ensure the stable forming action under the influence of the mold heating, force, vibration and other environmental conditions. It should be confirmed whether to use it.
8. In order to avoid the small pieces of metal inserts and molding products piled in the mold cavity, the air blowing device can be assembled if necessary.
9. Because of the high investment price of system equipment, it is necessary to consider whether the production capacity of equipment can be ensured before using. When using special machine, it is necessary to ensure that the products can be continuously produced without form updating in several years.
10. When using general machine, it is necessary to confirm how many kinds of products and few batch inserts have combined production. If the overall production cannot be guaranteed in large quantities, it is difficult to recover the fixed assets of each product. Tekanan dalaman acuan yang tidak mencukupi juga akan berlaku, it is necessary to replace some devices to meet the requirements of variety renewal in a certain range.
11. The factors and technical decisions such as the accuracy of metal inserts, the shape of inserts, whether the mold is conducive to the shape of the inserts and the shape of the molded parts, dan lain-lain., which determine the molding rate, production and forming cost conditions of the inserts.
12. The key to the automatic insert forming system is the effective combination of injection machine, mold and automation device and how to play its functions in a short time. Please consult with the manufacturer with considerable practical experience to choose.
Mengenai JasonMould Industrial Company Limited
Jasonmould adalah Pembuat acuan China dari acuan plastik- acuan suntikan, acuan pemutus mati, acuan plastik, acuan putaran, perubatan pengacuan suntikan plastik, dua pukulan pengacuan suntikan plastik, masukkan acuan, terlalu banyak, pengacuan suntikan logam, pengacuan suntikan mikro, pengacuan suntikan serbuk, pengacuan suntikan seramik, pengacuan suntikan cecair, acuan suntikan husky, acuan isi rumah, acuan pemutus, alat acuan mati, acuan khas, acuan cina, perkakas prototaip pantas, perkakas prototaip plastik, perkakas penebuk, mati dan perkakas untuk bahagian telefon bimbit / telefon bimbit, bahagian automotif, pembersih vakum, alat yang boleh dicas semula, telefon, mesin penyalin, komputer, pembesar suara multimedia, dan banyak produk elektronik dan perkakas rumah yang lain. Dan juga pengeluar produk plastik, pengeluar acuan China- bahagian plastik, tangki air plastik, bola plastik, bekas plastik, gesper plastik, sauh plastik, penyangkut plastik, sudu plastik, pemasangan paip plastik, plastik jatuh, pinggan mangkuk plastik, cawan plastik, botol plastik, dulang plastik, bekas kosmetik plastik, sarung plastik, bekas makanan plastik, kerusi plastik, penutup plastik, penutup penutup plastik, tiub plastik, paip air plastik, tombol plastik, tiub plastik, kotak utiliti plastik, rak plastik dan sebagainya.
Hubungi:
Orang: James Yuan
Syarikat: JasonMould Industrial Company Limited
Tambah: Kampung LongGang,Bandar LongXi,Daerah BoLuo,Bandar HuiZhou,Wilayah GuangDong, China
Tel: 86-752-6682869
E-mel: [email protected]
Tapak: https://www.jasonmolding.com/custom-injection-molding/
