Skru jawatan juga dipanggil bos, yang merupakan ciri kebanyakan produk. Perkara penting apa yang harus kita perhatikan ketika merancang struktur? Mari kita lihat:
- Ketebalan dinding bos, pada masa reka bentuk struktur, kita perlu mengambil kira kekuatan bos, jadi seboleh-bolehnya tiang melakukan ketebalan dinding tebal, tetapi ini akan menyebabkan bahagian pembentuk positif mengecut, we can design according to the main body of the wall thickness of boss wall thickness, generally not less than 0.8 mm, can only do in mold department is greater than 0.8 mm tube, for their depth of more than 15 mm parts we must pay attention to this; It cannot be more than 60% of the wall thickness of the main body, which is our accumulated experience in thousands of sets of molds. If the surface of the part cannot accept shrinkage, you are better to accept our experience.
- Reduce the wall thickness of the boss, strength weakened will follow, probably can’t meet our functional requirements, such as torsion test tensile test and so on, this is can be improved by increasing the stiffener, namely we often say that rib, it will make the strength of pillars is better than the original wall thickness of the pillar strength, and perfectly to avoid sink mark.
- If the boss is on the inclined plane or arc plane, the contact area between the bottom of the boss and the inclined plane will be larger, so the risk of shrinkage will be increased. We can reduce the glue around the root of the boss to avoid the appearance problem, which is also known as the crater.
- We also have a little reminder, parts of the injection molding can’t connect with the product side together, if you do this, the strength of the boss could be OK, but is almost bound to form shrinkage in the side, and angle will be formed in the mould, we can in the post and leave some distance between the sides, and then use rib connected, have to say that strength is taken into account in structure design, rib is god.
Qualified structural design can not only reduce the cost of mold development, but also improve the qualified rate of products and even the overall quality, which means that the cost of our products will follow. If you have any questions on the design, please feel free to contact us.
Mengenai JasonMould Industrial Company Limited
Jasonmould adalah Pembuat acuan China dari acuan plastik- acuan suntikan, acuan pemutus mati, acuan plastik, acuan putaran, perubatan pengacuan suntikan plastik, dua pukulan pengacuan suntikan plastik, masukkan acuan, terlalu banyak, pengacuan suntikan logam, pengacuan suntikan mikro, pengacuan suntikan serbuk, pengacuan suntikan seramik, pengacuan suntikan cecair, acuan suntikan husky, acuan isi rumah, acuan pemutus, alat acuan mati, acuan khas, acuan cina, perkakas prototaip pantas, perkakas prototaip plastik, perkakas penebuk, mati dan perkakas untuk bahagian telefon bimbit / telefon bimbit, bahagian automotif, pembersih vakum, alat yang boleh dicas semula, telefon, mesin penyalin, komputer, pembesar suara multimedia, dan banyak produk elektronik dan perkakas rumah yang lain. Dan juga pengeluar produk plastik, pengeluar acuan China- bahagian plastik, tangki air plastik, bola plastik, bekas plastik, gesper plastik, sauh plastik, penyangkut plastik, sudu plastik, pemasangan paip plastik, plastik jatuh, pinggan mangkuk plastik, cawan plastik, botol plastik, dulang plastik, bekas kosmetik plastik, sarung plastik, bekas makanan plastik, kerusi plastik, penutup plastik, penutup penutup plastik, tiub plastik, paip air plastik, tombol plastik, tiub plastik, kotak utiliti plastik, rak plastik dan sebagainya.
Hubungi:
Orang: James Yuan
Syarikat: JasonMould Industrial Company Limited
Tambah: Kampung LongGang,Bandar LongXi,Daerah BoLuo,Bandar HuiZhou,Wilayah GuangDong, China
Tel: 86-752-6682869
E-mel: [email protected]
Tapak: https://www.jasonmolding.com/custom-injection-molding/
