Beberapa tahun kebelakangan ini, disebabkan oleh pelbagai sebab industri acuan, pembangunan industri acuan menghadapi banyak kesukaran. Ia tidak sebaik dahulu, dan prospek pembangunan masa depan tidak begitu jelas. Pada akhirnya, ramai orang terpaksa meninggalkan industri. Orang baru mempunyai keraguan. Adakah industri acuan merosot? Adakah industri acuan akan dihapuskan? Sebelum membincangkan isu ini, analisa dahulu kedudukan acuan dalam keseluruhan industri pembuatan, dan secara semula jadi memahami prospeknya.
Keadaan semasa industri acuan
Terdapat beberapa faktor yang membawa kepada kesusahan semasa industri acuan.
Pertama sekali, persekitaran pasaran. Sejak krisis kewangan di 2008, krisis tidak pernah pergi. Dalam dua tahun pertama, kerana kerajaan $4 trilion, ia masih bertambah baik, dan dalam 2012, ia tertekan lagi.
Faktor-faktor ini menyebabkan industri pembuatan menghadapi kesukaran. Sebagai salah satu industri teras industri pembuatan, industri acuan secara semula jadi akan terjejas secara langsung, dengan pesanan yang lebih sedikit dan keuntungan yang lebih rendah. Bagi mereka yang terlibat dalam industri acuan, ia secara langsung akan menjejaskan pendapatan mereka.
Ini adalah faktor objektif luaran. Sangat sukar untuk mengubah faktor ini dalam jangka pendek, dan ia pada asasnya mustahil. It can be expected that things will improve gradually. It is very difficult to reach the sky in one step.
The development of everything is cyclical. The current trough is only temporary, and the overall trend of China’s economy will not change. The difficulties caused by this will certainly be gradually eliminated in a short period of time in the future. Oleh itu, there is nothing to worry about this factor. The economic downturn has affected not only the mold industry, but also the whole automobile industry. Dalam analisis akhir, the decline of the whole automobile industry has indirectly affected the mold industry. Many automobile manufacturers have urgently stopped and dismounted their models; Oleh itu, as the upstream industry of all industries, industri pembuatan acuan mempunyai kesan yang paling langsung dan perasaan yang paling jelas.
Acuan dipanggil ibu industri. Ia bukan omong kosong, tetapi sebarang produk yang dihasilkan secara besar-besaran tidak boleh dipisahkan daripada acuan.
Faktor subjektif dalam industri acuan
Yang pertama ialah kilang acuan. Beberapa tahun kebelakangan ini, tertarik dengan keuntungan meletup dalam industri acuan tadi, ramai pengamal industri acuan telah memulakan perniagaan mereka sendiri setelah mengumpul teknologi tertentu, modal dan kenalan, dan telah menjadi bos daripada orang gaji. Akibatnya, kedai pemprosesan besar dan kecil, kilang acuan, dan kedai-kedai guna habis telah bermunculan satu demi satu, dan bilangan syarikat acuan telah hampir meningkat pada gandaan geometri.
Dari sudut perkembangan peribadi, ini secara semula jadi adalah perkara yang baik. Tetapi dari perspektif keseluruhan industri, kerja yang dilakukan oleh satu syarikat mempunyai keuntungan yang tinggi. Kini tiga syarikat bersaing. Untuk mendapatkan pesanan, perang harga tidak dapat dielakkan. awak 10, Saya 8, awak 8, Saya 5. Itu dia, dalam membeli-belah seperti ini, industri acuan akhirnya telah berubah daripada industri mencari untung kepada industri untung sederhana atau pun industri untung rendah. Dalam pertempuran yang sengit ini, syarikat yang berbeza memulakan laluan yang berbeza; Terdapat juga beberapa kawasan di mana acuan tertumpu, dan persaingan lebih jelas.
Sesetengah syarikat menegaskan kualiti dan tidak terlibat dalam perang harga. Dengan sokongan pelanggan tetap dan pusing ganti modal yang mencukupi, mereka secara beransur-ansur berkembang dari kecil kepada besar dan akhirnya menjadi syarikat besar. Walau bagaimanapun, sesetengah syarikat kekurangan ini, dan pilih perang harga di dua jalan kualiti dan harga. Bagi menjimatkan kos, mereka perlu memampatkan peralatan dan buruh. Akibatnya, lingkaran ganas terbentuk. Kualiti semakin teruk dan harga seunit semakin rendah, dan akhirnya pintu ditutup. Apabila syarikat ditutup, ia selalunya akan menghasilkan tindak balas berantai, yang akan menyebabkan beberapa syarikat tidak menerima bayaran, terutamanya yang lebih besar.
Dalam tempoh yang agak sukar dalam beberapa tahun kebelakangan ini, sebilangan besar perusahaan kecil dengan daya maju yang lemah sama ada telah berkembang ke landasan yang betul atau ditutup. Pada asasnya, mereka yang boleh hidup hingga sekarang ada cara tersendiri, itu dia, ombak membasuh pasir dan yang paling kuat bertahan. Keusahawanan adalah satu perkara yang baik. Kemudahan memulakan perniagaan dalam industri acuan juga merupakan ciri yang menarik ramai orang untuk menyertainya. Walau bagaimanapun, keusahawanan adalah berisiko. The success of a company is often based on the failure of more companies. It is better to start a business after you have a certain foundation in capital, contacts and technology, especially after you have stable customers. It is often very difficult to set up a stall before looking for customers. If you are not careful, the capital chain will be broken.
These are the subjective factors within the mold industry. The industry itself expands too fast, and even if the economy is prosperous, the competition will be fierce. What’s more, it is unfortunate to encounter an economic downturn, and difficulties arise.
Let’s talk about the future development expectations:
Development expectation of mold industry
The first is the external environment, which has to be considered. Economic recovery is only a matter of time. There is nothing to worry about. Selepas itu, there will naturally be a series of measures to stimulate the economy. As long as China’s economy remains at about 8% per year, the manufacturing industry and the mold industry have nothing to worry about.
Then the internal environment. After the brutal competition in these extraordinary years and the closure of many poorly managed enterprises, the survivors naturally have their own way of survival. Either there are stable customers, strong business ability, or excellent quality. The wine pilgrims come from the company, and the company’s management personnel and technical force tend to be stable. Only in this way can the company pass through the running in period and enter the stable period. Tetapi juga mempunyai populariti tertentu.
Sebaik sahaja persekitaran luaran syarikat sedemikian bertambah baik dan jumlah perniagaan meningkat, peningkatan keuntungan boleh dijangka. Kembangkan dengan sewajarnya mengikut volum perniagaannya sendiri. Dari segi harga, ia juga akan jauh lebih baik daripada tempoh perang berdarah semasa. Lagipun, ia bukanlah cara diraja untuk melawan perang harga secara membabi buta, dan syarikat sedemikian tidak akan bertahan lama. Selepas penghapusan beberapa perusahaan, keadaan di mana terdapat terlalu ramai pekerja tetapi tidak mencukupi pekerja telah berubah, dan tidak perlu terlibat dalam perang harga.
Masalah dalam industri acuan
Pada masa lalu, Industri acuan China terutamanya memproses acuan gred rendah hingga gred sederhana. Tidak banyak acuan mewah, dan mereka pada asasnya dieksport. Walau bagaimanapun, with the upgrading of China’s mold industry equipment and the maturity of the training of technical personnel, a large number of mold factories have the qualifications and strength to manufacture high-end molds. Lebih-lebih lagi, with a large number of companies placing the assembly of high-end products at home, the demand for high-end molds is also increasing. Oleh itu, the dependence on the foreign economic environment has been shaken off to a certain extent.
Then there are low-end molds. Due to the continuous rise of wages, energy, rent and other factors (as long as there is no economic crisis, these improvements will not stop), the future survival of companies that have been doing low-end molds will become increasingly difficult, and their meager profits will not be enough to cope with the rise of various expenses. Nanti, bersama-sama dengan pengeluaran produk rendah, ia akan mula beralih ke kawasan yang kurang maju dari segi ekonomi dan kawasan yang mempunyai kos buruh yang rendah. Ini kerana acuan low-end pada asalnya dihasilkan untuk dipadankan dengan pengeluaran produk low-end. Sebagai bahagian teras rantaian pembuatan produk, produk rendah secara semula jadi akan dipindahkan, yang pasti.
Kebangkitan China tidak dapat dihalang, dan transformasi industri pembuatan tidak dapat dihalang. Begitu juga industri acuan kita.
Analisis khusus tentang trend pembangunan acuan masa depan
1、 Ketepatan yang tinggi
Sama ada ketepatan dimensi boleh dicapai adalah faktor yang paling penting untuk pembuatan ketepatan tinggi, produk berkualiti tinggi dan berteknologi tinggi. Jepun dan Jerman melakukan yang terbaik pada masa lalu. Dengan pembelajaran dan inovasi berterusan selama beberapa dekad, a large number of companies specializing in high-precision mold manufacturing have emerged in China’s mold industry.
2、 Tetapi pengacuan suntikan dua pukulan tidak berhenti pada warna
Itu dia, high automation. With the popularization of various automatic equipment (mainly manipulator) for mold production and the improvement of the intelligent degree of standard parts inside the mold, the efficiency of mold production is getting higher and higher, and will develop towards a higher and better state. Dalam proses ini, the requirements for mold designers will be higher and higher. At that time, mold designers can not only understand the automation equipment, but also participate in the design.
3、 New mold
With the continuous progress of technological innovation, many molds that need to be achieved in a complicated and tortuous way can become very simple. There are also many structures that were thought to be impossible. These are new opportunities and challenges for the mold industry. Secara khusus, they are opportunities and challenges for mold designers. Mold factories that master these new mold design and manufacturing technologies will have more initiative. Mastering high-tech molds requires profound design and manufacturing details. The rich profits of these new molds will be a good return to the companies that have invested a lot of money in this regard, and these high-tech technologies will also become a good resource for the company to make a name for itself and a bargaining chip for better customers!
Mold is always an industry that depends on technology and quality!
4、 Product R & D and mold integration
This trend is also inevitable. This change is a change that can affect the manufacturing mode more than replacing the all-round mold master with the assembly line. Pendek kata, mold design will be integrated with product R & D into a new post, a new post that can be responsible for a series of work of the whole product from appearance to mechanism, to mold, to mold processing, mold production and product assembly. Become the absolute core of the manufacturing industry.
Looking forward to the development prospect of mold industry
The mold industry is still promising, because it is after all the two cores of the manufacturing industry. Especially when the two cores start to merge into one core in the future, another golden age is coming! Even though it is indeed a recession and difficult, I can not deny this industry! Especially in such a basic industry.
The so-called entering against the market is the most difficult time, the time when the most people exit, and the time when it is good to enter, because it is the low point in the cycle.
Forecast and analysis of industry prospect
1. The market demand was further expanded
Pada masa ini, China has steadily promoted the transformation strategy of “replacing steel with plastic” dan “replacing wood with plastic”. Mold enterprises have stepped up product innovation, the proportion of high-end mold products has gradually increased, and the supporting services have been continuously improved. Relevant personnel expect that the market of precision injection molds and injection parts will usher in new growth points, and the market demand will further expand.
2. Policies to promote industrial transformation and upgrading
In view of the current situation of mold development, China has issued a series of relevant policies and regulations to continuously guide the production standards of the mold industry and make the injection molding product market move towards high-end.
3. The demand for one-stop products and services continues to rise
The mold industry has a rich variety of products. If you want to promote it, you need to fully understand the needs of customers, understand their ideas, provide customized products while improving the level of R & D, transform from a simple processing and manufacturing industry to an integrated comprehensive service provider, and create a manufacturing chain of terminal application products integrating mold design, pembuatan dan penjualan, Provide one-stop products and services to customers throughout the country and even the world.
4. New technology helps the high-quality development of the industry
Pada masa ini, China’s mold manufacturing industry is constantly learning from foreign enterprises, introducing, absorbing and imitating advanced production technology, and gradually moving towards a manufacturing power.
The above is the relevant introduction of the development status and future prospects of China’s mold industry. From this, we can see that the mold industry will not be eliminated. For those who have just entered the mold industry, I would like to offer some suggestions:
1. Don’t negate the technology industry easily. The technology industry needs time to accumulate. Don’t make a comparison between the income of general workers and the posts in the technology industry just started. This is meaningless. The sooner you get a high salary, the better your job is. When a general worker starts to work, he will work more overtime than a skilled worker who has worked for several years. But what about the future?
2. Not all technical posts have a very good future. We must carefully analyze the future development. We should carefully consider which posts are destined to decline and be eliminated, which posts will become more and more important, which can be studied for a lifetime, and which will become more and more popular.
3. As for learning methods, some skills can only be learned after several times with the master. Some skills can be self-taught, such as reading books and practicing with computers. But for some technologies, the lack of systematic learning is not worth the loss.
ia mungkin terjejas selepas memasang rod condong, Ltd.
Dj Cetakan adalah Pembuat acuan China dari acuan plastik- acuan suntikan, acuan pemutus mati, acuan plastik, acuan putaran, perubatan pengacuan suntikan plastik, dua pukulan pengacuan suntikan plastik, masukkan acuan, terlalu banyak, pengacuan suntikan logam, pengacuan suntikan mikro, pengacuan suntikan serbuk, pengacuan suntikan seramik, pengacuan suntikan cecair, acuan suntikan husky, acuan isi rumah, acuan pemutus, alat acuan mati, acuan khas, acuan cina, perkakas prototaip pantas, perkakas prototaip plastik, perkakas penebuk, mati dan perkakas untuk bahagian telefon bimbit / telefon bimbit, bahagian automotif, pembersih vakum, alat yang boleh dicas semula, telefon, mesin penyalin, komputer, pembesar suara multimedia, dan banyak produk elektronik dan perkakas rumah yang lain. Dan juga pengeluar produk plastik, pengeluar acuan China- bahagian plastik, tangki air plastik, bola plastik, bekas plastik, gesper plastik, sauh plastik, penyangkut plastik, sudu plastik, pemasangan paip plastik, plastik jatuh, pinggan mangkuk plastik, cawan plastik, botol plastik, dulang plastik, bekas kosmetik plastik, sarung plastik, bekas makanan plastik, kerusi plastik, penutup plastik, penutup penutup plastik, tiub plastik, paip air plastik, tombol plastik, tiub plastik, kotak utiliti plastik, rak plastik dan sebagainya.
Hubungi:
Orang: James Yuan
Syarikat: Huizhou Dj Molding Company Limited
Tambah: Kampung LongGang,Bandar LongXi,Daerah BoLuo,Bandar HuiZhou,Wilayah GuangDong, China
Tel: 86-752-6682869
E-mel: [email protected]
Tapak: https://www.jasonmolding.com/custom-injection-molding/
