1、 Doel
Om de kwaliteitscontrole van het proces te versterken, productkwaliteit verbeteren, Wanneer het onderdeel tot een groot of middelgroot formaat behoort, effectief het aantal herbewerkingen beheersen;, en toezicht houden op de zelfinspectie van operators;.
2、 Toepassingsgebied
Alle operators van injectiewerkplaatsen.
3、 Inhoud
1. Voor continue productie:, de exploitant moet het eerste stuk van kwaliteitsinspectie ter bevestiging verzenden, en het eerste stuk kan pas worden geproduceerd nadat het gekwalificeerd en verzegeld is. Op het label van het verzegelde monster moet het artikelnummer staan, naam, sample sealing person and sample sealing time, otherwise the products produced will be regarded as defective products.
2. The first product produced after color change, mold change, material change and mold repair can only be mass produced after passing the self inspection and sending it to the quality inspection for confirmation and sample sealing.
3. The products produced by each shift shall be self checked against the sealed samples and injection molding operation instructions. Before taking over the shift, check whether the plan card and the products, materials and colors after mold change are corresponding; Whether the sealing samples and injection molding operation instructions are in place. When taking over the shift, the products must undergo self inspection and initial inspection, and be inspected item by item according to the sealed samples, injection molding operation instructions and relevant quality documents. After confirmation, the products can be produced after taking over the shift.
4. Each shift shall carry out comprehensive self inspection as required, and complete the final product inspection before leaving work. If the final product inspection does not meet the quality requirements, all products of the shift shall be re inspected immediately.
5. If the product does not meet the quality requirements, the technician or the supervisor on duty shall be notified in time for adjustment. The product can be produced only after the product meets the quality requirements and is sent to the quality inspection for confirmation.
6. If you don’t know or know the product quality problem or can’t make accurate judgment, you should send the product to the quality inspector for confirmation and judgment, and know the product quality from the quality inspector.
7. Self checking method
8. Reworked products
The reworked products must be reworked by the operator, and no salary shall be paid during the rework period. For nonconforming products, the quality inspector shall issue a nonconforming product disposal form and directly submit it to the shift supervisor for signature. Reworked products can be warehoused only after they are confirmed to be qualified by quality inspection. The shift supervisor shall carefully implement the reworked products, and teach the operators to prevent the recurrence of similar problems according to the unqualified items determined by the quality inspection.
9. Nonconforming products
a. The operator must report the non-conforming products produced in the production process to the supervisor on duty for treatment, and record the number of non-conforming products in the daily production report of the injection molding workshop. b. The shift supervisor shall analyze the causes of products with high defect rate.
c. The unqualified products produced by the operator can be crushed after being confirmed by the shift supervisor and the quality inspector.
d. The shift supervisor shall collect the daily inspection record form of injection molding workshop for each machine every day to the workshop supervisor for review, and track, verify and handle the abnormalities.
e. Supervise and urge operators to report non-conforming products, and the shift supervisor to handle them after reporting. The workshop controls the rate of defective products.
Over Huizhou Dj Molding Co., Ltd
Dj Mold is een Chinese matrijzenmaker van plastic mallen- spuitgietmatrijs:, spuitgietmatrijzen, kunststof blaasvormen, rotatiegieten, medisch spuitgieten van kunststof, twee schoten spuitgieten van kunststof, invoegen lijstwerk, overmolding, metalen spuitgieten, micro-spuitgieten, poeder spuitgieten, keramisch spuitgieten, vloeibare spuitgieten, husky spuitgieten, huishoudelijke schimmel, gietvorm, matrijs gereedschap:, aangepaste mallen, Chinese mallen:, tooling voor snelle prototyping, kunststof prototyping gereedschap, ponsmachine tooling, sterven en tooling voor mobiele/mobiele telefoon onderdelen, auto-onderdelen, stofzuigers, oplaadbare gereedschappen, telefoons, kopieerapparaten, computers, multimedia speakers, en vele andere elektronische producten en huishoudelijke apparaten. En ook een fabrikant van plastic producten, schimmelfabrikant China– kunststof onderdelen, plastic watertank, plastic ballen, plastic containers, plastic gesp, plastic anker, plastic hanger, Plastic lepel, plastic pijp montage:, plastic tuimelen, plastic servies, plastic bekers, plastic flessen, plastic dienblad, plastic cosmetische container, plastic verpakking, plastic voedselcontainer, plastic stoelen, plastic doppen, plastic dop sluiting, plastic buizen, kunststof waterleidingen, plastic knoppen, plastic buizen, plastic gebruiksdozen, plastic rekken enzovoort;.
Contact:
Persoon: James Yuan
Bedrijf: Huizhou Dj Molding Company Limited
Toevoegen: LongGang Village,LongXi Town,BoLuo County,HuiZhou-stad,Provincie GuangDong, China
Tel: 86-752-6682869
E-mail: [email protected]
website: https://www.jasonmolding.com/custom-injection-molding/
