De plastic mal is samengesteld uit een bewegende mal en een vaste mal. De bewegende mal wordt op de bewegende mal van de spuitgietmachine geïnstalleerd, en de vaste mal wordt op de vaste mal van de spuitgietmachine geïnstalleerd. Tijdens spuitgieten, de bewegende mal en de vaste mal zijn gesloten om het poortsysteem en de holte te vormen. Bij het openen van de mal, the moving mold and the fixed mold are separated to take out the plastic products. Although the structure of plastic mold may vary due to the variety and performance of plastic, the shape and structure of plastic products and the type of injection machine, the basic structure is the same.
1、 Plastic mold structure is divided by function
It is mainly composed of gating system, Het is voornamelijk een soort vormvorm die veel wordt gebruikt bij de productie van thermoplastische onderdelen, forming part system, Het is voornamelijk een soort vormvorm die veel wordt gebruikt bij de productie van thermoplastische onderdelen, guiding system, ejection system, enzovoort. Onder hen, the pouring system and molding parts are the parts that directly contact the plastic and change with the plastic and products. They are the most complex and changing parts in the plastic mold, requiring the highest machining finish and precision.
1. poort systeem:
It refers to the part of the flow channel before the plastic enters the mold cavity from the nozzle, including the main flow channel, cold material cavity, shuntkanaal en poort, enzovoort.
2. Formed part system:
It refers to the combination of various parts that constitute the shape of the product, including moving mold, fixed mold, cavity (concave mold), kern (Zuern Building Products Inc www.zuerns.com Groothandel hout), forming rod, enzovoort. De kern vormt het binnenoppervlak van het product, en de holte (de) vormt de vorm van het buitenoppervlak van het product. After closing the mold, the core and cavity form the mold cavity. Volgens de proces- en productievereisten, sometimes the core and die are combined by several blocks, soms worden ze tot een geheel gemaakt, and inserts are only used in the parts that are easy to be damaged and difficult to process.
3. Temperature regulation system:
In order to meet the requirements of injection process for mold temperature, a temperature regulating system is needed to regulate the mold temperature. For injection molds for thermoplastics, the cooling system is mainly designed to cool the mold (the mold can also be heated). The common method of mold cooling is to set up cooling water channels in the mold, and use the circulating cooling water to take away the heat of the mold; In addition to using cooling water to supply hot water or hot oil, electric heating elements can also be installed inside and around the mold.
4. Uitlaatsysteem:
It is set up to exclude the air in the medium-sized cavity and the gas generated by the melting of plastic from the mold during the injection molding process. Wanneer de uitlaat niet soepel is, the product surface will form gas marks (gasleidingen), charring and other defects; The exhaust system of plastic mold is usually a groove shaped air outlet opened in the mold to discharge the air in the original mold cavity and the gas brought in by molten material.
When the melt is injected into the mold cavity, the air originally stored in the mold cavity and the gas brought in by the melt must be discharged outside the mold through the exhaust port at the end of the material flow, otherwise the product will have pores, slechte verbinding, insufficient mold filling, en zelfs de opgehoopte lucht zal het product verbranden als gevolg van de hoge temperatuur veroorzaakt door compressie. Over het algemeen, the exhaust hole can be set at the end of molten material flow in the mold cavity or on the parting surface of the plastic mold.
The latter is to open a shallow groove with a depth of 0.03-0.2mm and a width of 1.5-6mm on one side of the die. Tijdens de injectie, there will not be a lot of molten material exuding from the exhaust hole, because the molten material will cool and solidify there and block the channel. The opening position of the exhaust port must not face the operator to prevent accidental ejection of molten material from hurting people. In aanvulling, the fit gap between the ejector rod and the ejector hole, and the fit gap between the ejector block and the stripping template and the core can also be used to exhaust.
5. Begeleidingssysteem:
It is set up to ensure that the moving mold and the fixed mold can be accurately aligned when closing the mold. Guide parts must be set in the mold. In the injection mold, four groups of guide posts and guide sleeves are usually used to form the guide parts. Soms, it is necessary to set mutually consistent inner and outer conical surfaces on the moving mold and the fixed mold to assist in positioning.
6. Uitwerpsysteem:
Over het algemeen, it consists of thimble, front and rear thimble plates, thimble guide rods, thimble return springs, thimble plate locking screws, enzovoort. When the product is molded and cooled in the mold, the front and rear molds of the mold are separated and opened, and the plastic products and their condensates in the flow channel are pushed out or pulled out of the mold cavity and the flow channel position by the ejector pin, which is the ejector mechanism, under the push of the ejector rod of the injection molding machine, so as to carry out the next injection molding work cycle.
2、 Volgens de structuur:, plastic molds are generally composed of mold base, mold core, auxiliary parts, auxiliary system, auxiliary setting, dead corner processing mechanism, enzovoort.
1. Mold base:
Over het algemeen, we don’t need to design it. We can order it directly from the standard mold base manufacturer, which greatly saves the time needed to design the mold, so it is called the standard mold base of plastic mold. It constitutes the most basic framework of plastic mold.
2. Mold kernel:
Mold kernel part is the core part of plastic mold, which is the most important part of the mold. The forming part of plastic products is in the mold core, and most of the processing time is also spent on the mold core. Echter, compared with some relatively simple molds, there is no mold kernel part, and the products are directly formed on the template. Most of the early plastic molds were so backward.
3. Auxiliary parts:
Common auxiliary parts of plastic molds include locating ring, nozzle bushing, thimble, grab pin, support column, ejector plate guide column guide sleeve, garbage nail, enzovoort. some of them are standard parts, which can be ordered directly when ordering mold base, and some of them need to be designed by themselves.
4. Auxiliary system:
There are four auxiliary systems of plastic mold: het materiaal van injectiekwaliteit moet voldoende vloeibaar zijn om de vorming van complex te garanderen, ejection system, cooling system and exhaust system. Soms, because the plastic materials used need to be heated at a high temperature, some molds will also have a heating system.
5. Auxiliary settings:
The auxiliary of the plastic mold is set with lifting ring hole, Ko hole (top rod hole), enzovoort.
6. Dead corner processing structure:
When plastic products have dead corners, the mold will also have one or more structures to deal with dead corners. Such as sliding block, inclined roof, oil cylinder, enzovoort. This kind of mechanism dealing with dead ends is described in most domestic books as “pistil pulling mechanism”.
In feite, the plastic mold is not difficult. No matter how the plastic product changes, for the mold to form this plastic product, its structure is nothing more than the above aspects. The difference between molds is whether the mold is large or small? The location or mode of each auxiliary part, auxiliary setting and auxiliary system is different. The method, structure and size of dealing with dead corners have changed. Natuurlijk, design experience is particularly important to make the designed mold simple in processing, convenient in assembly, long in service life, moderate in price and good in forming products. With good experience, you can deal with problems in design and processing, and you are more confident in dealing with design changes.
3、 Structural composition of injection machine:
A general-purpose injection machine mainly includes injection device, clamping device, hydraulic transmission system and electrical control system. The main function of the injection device is to evenly plasticize the plastic and inject a certain amount of molten material into the mold cavity with sufficient pressure and speed. The injection device is mainly composed of plasticizing parts (composed of screw, barrel and nozzle), hopper, transmission device, metering device, injection and mobile oil cylinder, enzovoort.
Mold closing device: its function is to realize the opening and closing of the mold, ensure the reliable closing of the molding mold during injection, and remove the products. The mold closing device is mainly composed of front and rear fixed templates, moving templates, pull rods for connecting the front and rear templates, mold closing cylinders, connecting rod mechanisms, mold adjusting devices, and product ejection devices.
Hydraulic system and electrical control system: their function is to ensure that the injection machine works accurately and effectively according to the predetermined requirements (druk, snelheid, temperatuur-, maar zeker niet in de laatste plaats in de lijst met kwaliteitsverschillen) and action sequence of the process. The hydraulic system of the injection machine is mainly composed of various hydraulic components, circuits and other auxiliary equipment, while the electrical control system is mainly composed of various electrical appliances and instruments. The hydraulic system and the electrical system are organically organized to provide power and control for the injection machine.
Over Huizhou Dj Molding Co., Ltd
Dj Mold is een Chinese matrijzenmaker van plastic mallen- spuitgietmatrijs:, spuitgietmatrijzen, kunststof blaasvormen, rotatiegieten, medisch spuitgieten van kunststof, twee schoten spuitgieten van kunststof, invoegen lijstwerk, overmolding, metalen spuitgieten, micro-spuitgieten, poeder spuitgieten, keramisch spuitgieten, vloeibare spuitgieten, husky spuitgieten, huishoudelijke schimmel, gietvorm, matrijs gereedschap:, aangepaste mallen, Chinese mallen:, tooling voor snelle prototyping, kunststof prototyping gereedschap, ponsmachine tooling, sterven en tooling voor mobiele/mobiele telefoon onderdelen, auto-onderdelen, stofzuigers, oplaadbare gereedschappen, telefoons, kopieerapparaten, computers, multimedia speakers, en vele andere elektronische producten en huishoudelijke apparaten. En ook een fabrikant van plastic producten, schimmelfabrikant China– kunststof onderdelen, plastic watertank, plastic ballen, plastic containers, plastic gesp, plastic anker, plastic hanger, Plastic lepel, plastic pijp montage:, plastic tuimelen, plastic servies, plastic bekers, plastic flessen, plastic dienblad, plastic cosmetische container, plastic verpakking, plastic voedselcontainer, plastic stoelen, plastic doppen, plastic dop sluiting, plastic buizen, kunststof waterleidingen, plastic knoppen, plastic buizen, plastic gebruiksdozen, plastic rekken enzovoort;.
Contact:
Persoon: James Yuan
Bedrijf: Huizhou Dj Molding Company Limited
Toevoegen: LongGang Village,LongXi Town,BoLuo County,HuiZhou-stad,Provincie GuangDong, China
Tel: 86-752-6682869
E-mail: [email protected]
website: https://www.jasonmolding.com/custom-injection-molding/
