“e pode ser”. e pode ser. e pode ser “e pode ser”. e pode ser. e pode ser.
PP, e pode ser, e pode ser “100 fold glue” because of its good breaking resistance. PP is a semi-transparent, semi-crystalline thermoplastic with high strength, good insulation, low water absorption, high thermal deformation temperature, low density, high crystallinity and other characteristics. Modified filler usually consists of glass fiber, mineral filler, thermoplastic rubber and so on.
The mobility of PP with different uses is quite different. The PP flow rate
commonly used is between ABS and PC.
- Plastics treatment
Pure PP is translucent ivory white and can be dyed into various colors. The dyeing of PP can only be made of color masterbatch on the general injection molding machine. In some machines, the independent plasticizing element with enhanced mixing effect can also be dyed with toner. For outdoor products, UV stabilizer and carbon black are commonly used. The proportion of recycled materials should not exceed 15%, otherwise it will cause strength degradation and discoloration. PP does not require special dry treatment before injection molding.
- Injection molding machine selection
There is no special requirement for the selection of injection molding machines. Because PP has high crystallinity. A computerized injection molding machine with high injection pressure and multi segment control is required. The clamping force is generally determined by 3800t/m2, and the injection volume is 20%-85%.
- Mold and gate design
The mold temperature is 50-90 graus, and the higher die temperature is required for higher dimension requirements. Core temperature is lower than cavity temperature by more than 5, runner diameter is 4-7 milímetros, needle gate length is 1-1.5 milímetros, diameter can be less than 0.7 milímetros. The shorter the length of the edge gate is, the better it is, cerca de 0.7 milímetros, the depth is half of the wall thickness, the width is twice of the wall thickness, and increases with the length of the melt flow in the cavity. The mold must have good exhaust performance. The depth of the exhaust hole is 0.025mm-0.038mm and the thickness is 1.5mm. To avoid shrinkage marks, large and round notches and circular runners are needed. The thickness of the reinforcing ribs should be small (por exemplo, 50-60% of the wall thickness). Homopolymer PP products, thickness should not exceed 3 milímetros, otherwise there will be bubbles (thick-walled products can only be copolymer PP).
- Temperatura de fusão
The melting point of PP is 160-175 C and the decomposition temperature is 350 C. Contudo, the setting temperature of PP can not exceed 275 C during injection processing, and the melting temperature should be 240 C.
- Velocidade de injeção
In order to reduce internal stress and deformation, high-speed injection should be selected, but some grades of P P and molds are not suitable (bolha, air striation). If there are light and dark streaks diffused by the gate on the surface with pattern carved, the low speed injection and higher mold temperature should be used.
- Glue back pressure
The back pressure of the toner can be adjusted appropriately by using 5bar glue back pressure.
- Injection and pressure keeping
Higher injection pressure (1500-1800bar) and packing pressure (cerca de 80% of injection pressure) were used. Around 95% of the full journey, the pressure is kept at a longer holding time.
- Post processing of products
In order to prevent shrinkage deformation caused by post crystallization, products are generally soaked in hot water.
JasonMould Industrial Company Limited, estabelecida em 2010, é um fabricante líder de moldagem por injeção na China. JasonMould é especialista na produção de moldes de plástico para eletrodomésticos, equipamentos médicos, equipamentos eletrônicos, equipamentos de segurança, bem como sistema de monitoramento.
A empresa acabou 15000 fábrica de metros quadrados. Com divisões de ferramentas de injeção de plástico possuindo diferentes maquinários e conhecimentos, JasonMould oferece ferramentas desde pequenas e precisas peças de telefones celulares até tão grandes quanto peças automotivas. Nossas ferramentas são exportadas principalmente para os EUA., Europa, Japão e Reino Unido. A estratégia de diversificação e serviço completo da JasonMould ganhou elogios de clientes em todo o mundo.
Nossa missão é fornecer aos nossos clientes produtos e serviços de moldagem de alta qualidade. Nosso objetivo é superar as expectativas de preços de nossos clientes, qualidade e entrega no prazo. Para cumprir nossa missão, JasonMould:
- Compromete-se a melhorar continuamente as habilidades e eficiência dos funcionários,
- Oferece aos nossos funcionários um ambiente de trabalho limpo e seguro,
- Atualiza a tecnologia da máquina e o equipamento de suporte por meio de um programa de manutenção rígido, e
- Mantém as ferramentas dos clientes em seu pico mais alto de desempenho
Para saber mais sobre o fabricante personalizado de produtos de moldagem de plástico,por favor visite https://www.jasonmolding.com/
Eles exportam suas ferramentas para diferentes partes do mundo e se tornaram um dos nomes mais famosos do setor industrial:
Pessoa de contato: James Yuan
Nome da empresa: JasonMould Industrial Company Limited
Endereço: LongGang Village,LongXi Town,BoLuo County,Cidade de HuiZhou,Província de Guangdong, China
Telefone: 86-752-6682869
E-mail: [email protected]
Local na rede Internet: https://www.jasonmolding.com
