Формование вставками - это метод формования интегрированного продукта путем впрыскивания смолы в заранее подготовленные разнородные вставки в форме., и материалы для плавления скрепляются и затвердевают с помощью вставок.
Литье SERT на подложке относится к методу встраивания деталей для литья под давлением на поверхность металлической пластины..
Два метода формования по существу одинаковы. Его характеристики следующие.
1. Композит из формуемости смолы, свойство изгиба и жесткость металла, strength and heat resistance can make a complex and exquisite metal plastic integrated product.
2. Особенно, the combination of insulation and metal conductivity of resin can meet the basic functions of electrical products.
3. The pre forming combination of multiple inserts makes the post engineering of product unit combination more reasonable.
4. The embedded products are not limited to metal, but also have cloth, paper, провод, пластик, Литье пластмасс под давлением, древесина, coil, electrical parts and so on.
5. For the rigid molding products and the bending elastic molding products on the rubber sealing pad, the integrated products are made by injection molding on the base, which can save the complicated operation of arranging the sealing rings, making the automatic combination of the later process easier.
6. Because of the fusion of the material and metal insert, compared with the press in molding method, the metal insert gap can be designed to be narrower.
7. The proper resin and forming conditions are selected, то есть, for products (such as glass, coil, electrical parts, и т.п.) which are easy to be pressed and damaged, they can also be sealed and fixed by resin.
8. The inserts can also be completely sealed into the resin by selecting the appropriate mold construction.
9. After the insert is formed, the product with hollow groove can be made after core removal hole treatment.
10. The combination of vertical injection molding machine, manipulator, and whole line of insert products can realize automatic production in most of the embedded parts forming engineering.
Considerations for design and selection of automatic insert forming system
1. The metal insert is easy to produce uneven shrinkage. The limit test of shape and dimension precision of important parts should be done in advance.
2. The metal insert is easy to deform and shift during injection. The mold composition and the design of mold shape which is easy to maintain the metal insert should be fully considered. For the products whose shape cannot be changed, the prior test is indispensable.
3. When the conveyor is used for the separation of metal inserts, the contact between metal inserts and the insert and vibration ball will cause slight damage to the surface of the insert, which will affect the product quality. The allowable limit range of quality shall be confirmed in advance.
4. The serration, коробление, material thickness difference, diameter difference and thickness difference caused by gold deposit processing should be measured in advance. On this basis, the design of the matching selection and mold structure of the automation device is carried out.
5. The predictable problems restricting mold construction such as gate position and forming period are solved in advance or corresponding improvement measures are available.
6. It shall be confirmed whether the metal insert needs preheating or drying treatment. The purpose is to ensure the quality of products and the stability of forming.
7. All kinds of testing devices set in the mold are used to ensure the stable forming action under the influence of the mold heating, force, vibration and other environmental conditions. It should be confirmed whether to use it.
8. In order to avoid the small pieces of metal inserts and molding products piled in the mold cavity, the air blowing device can be assembled if necessary.
9. Because of the high investment price of system equipment, it is necessary to consider whether the production capacity of equipment can be ensured before using. When using special machine, it is necessary to ensure that the products can be continuously produced without form updating in several years.
10. When using general machine, it is necessary to confirm how many kinds of products and few batch inserts have combined production. If the overall production cannot be guaranteed in large quantities, it is difficult to recover the fixed assets of each product. В таком случае, it is necessary to replace some devices to meet the requirements of variety renewal in a certain range.
11. The factors and technical decisions such as the accuracy of metal inserts, the shape of inserts, whether the mold is conducive to the shape of the inserts and the shape of the molded parts, и т.п., which determine the molding rate, production and forming cost conditions of the inserts.
12. The key to the automatic insert forming system is the effective combination of injection machine, mold and automation device and how to play its functions in a short time. Please consult with the manufacturer with considerable practical experience to choose
Формование вставками - это метод формования интегрированного продукта путем впрыскивания смолы в заранее подготовленные разнородные вставки в форме., и материалы для плавления скрепляются и затвердевают с помощью вставок.
Литье SERT на подложке относится к методу встраивания деталей для литья под давлением на поверхность металлической пластины..
Два метода формования по существу одинаковы. Его характеристики следующие.
1. Композит из формуемости смолы, свойство изгиба и жесткость металла, strength and heat resistance can make a complex and exquisite metal plastic integrated product.
2. Особенно, the combination of insulation and metal conductivity of resin can meet the basic functions of electrical products.
3. The pre forming combination of multiple inserts makes the post engineering of product unit combination more reasonable.
4. The embedded products are not limited to metal, but also have cloth, paper, провод, пластик, Литье пластмасс под давлением, древесина, coil, electrical parts and so on.
5. For the rigid molding products and the bending elastic molding products on the rubber sealing pad, the integrated products are made by injection molding on the base, which can save the complicated operation of arranging the sealing rings, making the automatic combination of the later process easier.
6. Because of the fusion of the material and metal insert, compared with the press in molding method, the metal insert gap can be designed to be narrower.
7. The proper resin and forming conditions are selected, то есть, for products (such as glass, coil, electrical parts, и т.п.) which are easy to be pressed and damaged, they can also be sealed and fixed by resin.
8. The inserts can also be completely sealed into the resin by selecting the appropriate mold construction.
9. After the insert is formed, the product with hollow groove can be made after core removal hole treatment.
10. The combination of vertical injection molding machine, manipulator, and whole line of insert products can realize automatic production in most of the embedded parts forming engineering.
Considerations for design and selection of automatic insert forming system
1. The metal insert is easy to produce uneven shrinkage. The limit test of shape and dimension precision of important parts should be done in advance.
2. The metal insert is easy to deform and shift during injection. The mold composition and the design of mold shape which is easy to maintain the metal insert should be fully considered. For the products whose shape cannot be changed, the prior test is indispensable.
3. When the conveyor is used for the separation of metal inserts, the contact between metal inserts and the insert and vibration ball will cause slight damage to the surface of the insert, which will affect the product quality. The allowable limit range of quality shall be confirmed in advance.
4. The serration, коробление, material thickness difference, diameter difference and thickness difference caused by gold deposit processing should be measured in advance. On this basis, the design of the matching selection and mold structure of the automation device is carried out.
5. The predictable problems restricting mold construction such as gate position and forming period are solved in advance or corresponding improvement measures are available.
6. It shall be confirmed whether the metal insert needs preheating or drying treatment. The purpose is to ensure the quality of products and the stability of forming.
7. All kinds of testing devices set in the mold are used to ensure the stable forming action under the influence of the mold heating, force, vibration and other environmental conditions. It should be confirmed whether to use it.
8. In order to avoid the small pieces of metal inserts and molding products piled in the mold cavity, the air blowing device can be assembled if necessary.
9. Because of the high investment price of system equipment, it is necessary to consider whether the production capacity of equipment can be ensured before using. When using special machine, it is necessary to ensure that the products can be continuously produced without form updating in several years.
10. When using general machine, it is necessary to confirm how many kinds of products and few batch inserts have combined production. If the overall production cannot be guaranteed in large quantities, it is difficult to recover the fixed assets of each product. В таком случае, it is necessary to replace some devices to meet the requirements of variety renewal in a certain range.
11. The factors and technical decisions such as the accuracy of metal inserts, the shape of inserts, whether the mold is conducive to the shape of the inserts and the shape of the molded parts, и т.п., which determine the molding rate, production and forming cost conditions of the inserts.
12. The key to the automatic insert forming system is the effective combination of injection machine, mold and automation device and how to play its functions in a short time. Please consult with the manufacturer with considerable practical experience to choose.
О компании JasonMould Industrial Company Limited
Джейсонмулд - это Производитель пресс-форм в Китае пластиковых форм- пресс-форма для литья под давлением, формы для литья под давлением, выдувное формование пластика, ротационное формование, медицинский литье пластмасс под давлением, два выстрела литье пластмасс под давлением, вставка молдинга, формование, литье металла под давлением, микро литье под давлением, порошковое литье под давлением, керамическое литье под давлением, жидкое литье под давлением, хаски литье под давлением, бытовая плесень, литейная форма, инструмент для штамповки, нестандартные формы, фарфоровые формы, инструменты для быстрого прототипирования, инструменты для изготовления пластиковых прототипов, инструмент для штамповки, штамп и инструменты для деталей мобильных / сотовых телефонов, автомобильные запчасти, пылесосы, аккумуляторные инструменты, телефоны, копировальные аппараты, компьютеры, мультимедийные колонки, и многие другие электронные товары и бытовая техника. А также производитель пластиковых изделий, производитель пресс-форм Китай- пластиковые детали, пластиковый резервуар для воды, пластиковые шары, пластиковые контейнеры, пластиковая пряжка, пластиковый якорь, пластиковая вешалка, пластиковая ложка, пластиковые фитинги, пластиковая мешалка, пластиковая посуда, пластиковые стаканы, пластиковые бутылки, пластиковый поднос, пластиковый косметический контейнер, пластиковый корпус, пластиковый контейнер для еды, пластиковые стулья, пластиковые колпачки, пластиковая крышка, пластиковые трубки, пластиковые водопроводные трубы, пластиковые ручки, пластиковые трубки, пластиковые хозяйственные ящики, пластиковые стойки и тд.
Контакт:
Человек: Джеймс Юань
Компания: JasonMould Industrial Company Limited
Добавлять: Деревня ЛонгГанг,LongXi Town,Округ БоЛуо,Город Хуэйчжоу,Провинция Гуандонг, Китай
Тел.: 86-752-6682869
Электронное письмо: [email protected]
Сайт: https://www.jasonmolding.com/custom-injection-molding/
