Der Grund, warum leicht Luftflecken am Wassereinlass von PC-Teilen auftreten, wurde zuvor beschrieben, was durch zu schnelle Leimeinspritzgeschwindigkeit verursacht wird. Deshalb, um das Problem der Luftflecken am Wassereinlass zu lösen, we must try to reduce the injection speed without producing chatter marks and material shortage.
Deshalb, we should first ensure that the melt temperature is high enough. In the case of no discoloration and no scorching, we should try our best to increase the melt temperature to 310 ℃ (for pc7025a and pc1250y materials).
Zweitens, and most importantly, the mold cavity temperature must be raised to 90-110 ℃. In production, the cooling water can be turned off to raise the temperature of the mould with core.
When the mold temperature rises to more than 90 ℃, the injection can be carried out at a very slow speed, and the air marks in the injection parts will gradually fade with the decrease of the injection speed until they disappear. When the melt glue flows through the area where the air marks are formed, it must be turned back to high-speed and high-pressure injection immediately, otherwise the injection parts will produce chatter marks and lack of material.
It should be noted that the mold temperature should not rise too high. If the temperature exceeds 120 ℃, the injection parts will shrink easily, the cooling time will be prolonged, and the production speed will become very slow. Gleichzeitig, the service life of the mold will be shortened because of the high mold temperature, and the surface of the injection parts may even have the problem of dull color.
For the safety of workers, it is best not to use hot oil machine to increase the mold temperature. Because if the temperature of hot oil is adjusted to above 90 ℃, once there is oil leakage, the consequences will be unimaginable. Deshalb, if you want to use hot oil engine, you must pay attention to safety.
If the beer piece is thin and big, the heat of the melt will dissipate very quickly, and the heat is also very limited. It is difficult for the mold temperature to rise, and it is a problem whether the material can go well. Zu diesem Zeitpunkt, we need to add heating tube in the mold to achieve the purpose of heating. Gleichzeitig, it is necessary to increase the width of the water inlet to increase the flux and reduce the filling time, so as to fill the mold cavity and eliminate the gas streak.
If the mold can be changed to hot water port design, it will be very helpful to solve the problem of gas grain.
Über JasonMould Industrial Company Limited
Jasonmould ist ein China Formenbauer von Kunststoffformen- Spritzgussform, Druckgussformen, Kunststoffblasformen plastic, Rotationsformen, medizinisch Kunststoff-Spritzguss, zwei Schuss Kunststoff-Spritzguss, Umspritzen, Umspritzen, Metallspritzguss, Mikrospritzguss, Pulverspritzguss, Keramikspritzguss, Flüssigspritzguss, Husky-Spritzguss, Haushaltsform, Gießform, Formwerkzeug, benutzerdefinierte Formen mold, Porzellanformen, Rapid-Prototyping-Werkzeuge, Kunststoff-Prototyping-Werkzeuge, Stanzpresswerkzeuge, Matrize und Werkzeuge für Handy-/Handyteile, Autoteile, Staubsauger, wiederaufladbare Werkzeuge, Telefone, Kopierer, Computers, Multimedia-Lautsprecher, und viele andere elektronische Produkte und Haushaltsgeräte. Und auch ein Hersteller von Kunststoffprodukten, Formenhersteller China- Kunststoffteile, Wassertank aus Kunststoff, Plastikkugeln, Kunststoffbehälter, Plastikschnalle, Kunststoffanker, Kleiderbügel aus Kunststoff, Plastiklöffel, Rohrverschraubung aus Kunststoff, Plastiktrommel, Plastikgeschirr plastic, Plastiktassen, Plastikflaschen, Plastikschale, Kosmetikbehälter aus Kunststoff, Plastikbehälter, Lebensmittelbehälter aus Plastik, Plastikstühle, Plastikkappen, Verschluss aus Kunststoff, Kunststoffrohre, Wasserrohre aus Kunststoff, Kunststoffknöpfe, Kunststoffschlauch, Gebrauchskartons aus Kunststoff, Plastikregale und so weiter.
Kontakt:
Person: James Yuan
Unternehmen: JasonMould Industrial Company Limited
Hinzufügen: LongGang-Dorf,LongXi-Stadt,Bezirk BoLuo,Stadt HuiZhou,Provinz Guangdong, China
Tel: 86-752-6682869
Email: [email protected]
Seite? ˅: https://www.jasonmolding.com/custom-injection-molding/
