Dalam proses pemprosesan acuan suntikan, Tingkatkan tekanan suntikan maksimum untuk bahagian ini. Tingkatkan tekanan suntikan maksimum untuk bahagian ini. Tingkatkan tekanan suntikan maksimum untuk bahagian ini, tekanan dan kesan berbeza sepadan yang mempengaruhi aliran pemplastikan dan penyejukan. Apakah untuk mengurangkan masa penggunaan pemprosesan acuan ketepatan, analisis kami boleh dibahagikan secara kasar kepada tiga aspek: pertama, suhu dan kawalan, kedua, pengurusan dan kawalan tekanan, dan ketiga, membentuk kitaran. Disana ada 3 points in total when the temperature reaches the control, indicating that the working temperature data of barrel, nozzle and die are as follows:
1. Suhu tong: the temperature of the selected barrel is also different according to different conditions. The temperature to be controlled in the process of injection mold has cylinder temperature, which mainly affects the plasticization and flow of plastic. Each plastic has different flow temperature. The same plastic has different flow temperature and decomposition temperature due to different sources or brands. This is because the average molecular weight and molecular weight distribution are different, and the plastics are also different in the plasticization process of different types of injection machines, so the choice of barrel temperature is different.
2. Suhu muncung: secara amnya, dalam kes ini, the nozzle temperature is slightly lower than the ambient temperature of the barrel, which is when the molten material is in the straight through nozzle in order to prevent salivation. The nozzle temperature should not be too low, otherwise we will block the nozzle due to the early solidification of melt, or students will affect the performance of their products due to the injection of early solidification into the mold cavity. Only appropriate temperature control can ensure the performance of products.
3. Suhu acuan: Secara amnya, mold temperature has a great impact on the internal performance and appearance quality of products, which can be said to be a very important factor. The temperature of the mold depends on the crystallinity of the plastic, saiz dan struktur produk, the requirements for performance, suhu cair, kelajuan suntikan, injection pressure and molding cycle.
ia mungkin terjejas selepas memasang rod condong, Ltd.
Dj Cetakan adalah Pembuat acuan China dari acuan plastik- acuan suntikan, acuan pemutus mati, acuan plastik, acuan putaran, perubatan pengacuan suntikan plastik, dua pukulan pengacuan suntikan plastik, masukkan acuan, terlalu banyak, pengacuan suntikan logam, pengacuan suntikan mikro, pengacuan suntikan serbuk, pengacuan suntikan seramik, pengacuan suntikan cecair, acuan suntikan husky, acuan isi rumah, acuan pemutus, alat acuan mati, acuan khas, acuan cina, perkakas prototaip pantas, perkakas prototaip plastik, perkakas penebuk, mati dan perkakas untuk bahagian telefon bimbit / telefon bimbit, bahagian automotif, pembersih vakum, alat yang boleh dicas semula, telefon, mesin penyalin, komputer, pembesar suara multimedia, dan banyak produk elektronik dan perkakas rumah yang lain. Dan juga pengeluar produk plastik, pengeluar acuan China- bahagian plastik, tangki air plastik, bola plastik, bekas plastik, gesper plastik, sauh plastik, penyangkut plastik, sudu plastik, pemasangan paip plastik, plastik jatuh, pinggan mangkuk plastik, cawan plastik, botol plastik, dulang plastik, bekas kosmetik plastik, sarung plastik, bekas makanan plastik, kerusi plastik, penutup plastik, penutup penutup plastik, tiub plastik, paip air plastik, tombol plastik, tiub plastik, kotak utiliti plastik, rak plastik dan sebagainya.
Hubungi:
Orang: James Yuan
Syarikat: Huizhou Dj Molding Company Limited
Tambah: Kampung LongGang,Bandar LongXi,Daerah BoLuo,Bandar HuiZhou,Wilayah GuangDong, China
Tel: 86-752-6682869
E-mel: [email protected]
Tapak: https://www.jasonmolding.com/custom-injection-molding/
