Sebenarnya, kejuruteraan acuan suntikan sering digunakan untuk membuat produk plastik. Ia juga menggunakan teknologi untuk menjadikan struktur dan saiz plastik menjadi bahan kerja, jadi struktur dan kualiti pengacuan suntikan secara langsung boleh menjejaskan kualiti produk siap. Apakah masalah yang mudah berlaku dalam kerja acuan suntikan? Mari kita lihat.
1. sukar menanggalkan sprue
Dalam proses pengacuan suntikan, the grid electrode of the grid electrode is glued with a sleeve, which is easy to sag. Apabila acuan dibuka, cracks appear and the articles are damaged. Sebagai tambahan, operators must use copper to knock from the nozzle head, which has a serious impact on the production efficiency after the release. The main cause of this kind of failure is the difference of the end-point gate of the taper hole and the circumferential direction of the hole mark. Kedua, the material is too soft, the small end of the taper hole is deformed or damaged after a period of time, and the spherical curvature of the nozzle is too small, which makes the rivet head of the grid material produced here. The processing difficulty standard of conical sprue sleeve should be adopted. For their own treatment, it should be carried out for later or special reamers. The cone is polished by Ra0.4 or more. Sebagai tambahan, the grid must be provided with a pull rod or sprue ejection mechanism.
2. guide post damage
The guide post mainly plays a guiding and educational role in the mold, so as to ensure that the forming surfaces of the core and cavity can not collide with each other in any case. The guide post design cannot be used as a force bearing part or positioning part. In the following analysis of several different cases, the moving die will produce a huge lateral horizontal offset force during injection: (1) when the wall thickness of the plastic part is required and uneven, the rate of material flow through the thick wall is large, where we generate a large pressure; (2) The side reaction of the plastic part is asymmetric, such as the development of the stepped parting surface, and the back pressure on the opposite sides of the die structure is also unequal.
3. movable formwork bending
Semasa pengacuan suntikan, reverse pressure may be generated in the mold cavity, and many workers often do not pay attention to this, resulting in the finished product deviates from the expected result,
Semasa suntikan, the molten plastic in the mold cavity generates a huge reverse pressure, usually 600-1000 kg / cm. Mold manufacturers sometimes do not pay attention to this problem, often change the original design size, or use low-strength steel plate to replace the movable formwork. For the top material with ejector rod on the mold, due to the large span on both sides of the valve seat, the template will bend downward during injection molding.
ia mungkin terjejas selepas memasang rod condong, Ltd.
Dj Cetakan adalah Pembuat acuan China dari acuan plastik- acuan suntikan, acuan pemutus mati, acuan plastik, acuan putaran, perubatan pengacuan suntikan plastik, dua pukulan pengacuan suntikan plastik, masukkan acuan, terlalu banyak, pengacuan suntikan logam, pengacuan suntikan mikro, pengacuan suntikan serbuk, pengacuan suntikan seramik, pengacuan suntikan cecair, acuan suntikan husky, acuan isi rumah, acuan pemutus, alat acuan mati, acuan khas, acuan cina, perkakas prototaip pantas, perkakas prototaip plastik, perkakas penebuk, mati dan perkakas untuk bahagian telefon bimbit / telefon bimbit, bahagian automotif, pembersih vakum, alat yang boleh dicas semula, telefon, mesin penyalin, komputer, pembesar suara multimedia, dan banyak produk elektronik dan perkakas rumah yang lain. Dan juga pengeluar produk plastik, pengeluar acuan China- bahagian plastik, tangki air plastik, bola plastik, bekas plastik, gesper plastik, sauh plastik, penyangkut plastik, sudu plastik, pemasangan paip plastik, plastik jatuh, pinggan mangkuk plastik, cawan plastik, botol plastik, dulang plastik, bekas kosmetik plastik, sarung plastik, bekas makanan plastik, kerusi plastik, penutup plastik, penutup penutup plastik, tiub plastik, paip air plastik, tombol plastik, tiub plastik, kotak utiliti plastik, rak plastik dan sebagainya.
Hubungi:
Orang: James Yuan
Syarikat: Huizhou Dj Molding Company Limited
Tambah: Kampung LongGang,Bandar LongXi,Daerah BoLuo,Bandar HuiZhou,Wilayah GuangDong, China
Tel: 86-752-6682869
E-mel: [email protected]
Tapak: https://www.jasonmolding.com/custom-injection-molding/
