In deze steeds competitievere marktomgeving, het verbeteren van de productie-efficiëntie is een belangrijke factor die ons kan helpen een gunstige positie in de concurrentie in te nemen. Krijg meer gedaan in minder tijd. Dit is de sleutel tot het verbeteren van de efficiëntie. In deze krant, several ways to improve the injection cycle of the injection mold by using the existing or newly designed injection molding machine or mold are described.
In het algemeen, the injection cycle of an oil pressure driven injection molding machine is from the beginning of mold closing to the next time of mold closing. Die closing is generally divided into four parts: fast die closing, slow die closing, low-pressure die protecting and high-pressure die locking. For the elbow joint injection molding machine designed recently, there are regeneration oil way to close the mold, in order to strive for a higher speed of closing the mold. Under the premise that the die is not subject to high impact, it is suitable to use.
It can reduce the time needed for high-pressure die locking section by adopting low die locking force which can make the finished product not produce burr. In aanvulling, the life of the mould, the pull rod of the injection molding machine and the mould plate will also be prolonged due to the low locking force.
I’ve heard that mold injection production is basically a heat exchanger. It’s true that the mold will continuously take away the molten heat through the cold water channel, and the properly designed mold can improve the efficiency of heat exchange. Echter, if allowed, cooling with ice water can shorten the “koeltijd”.
Eject. In a small injection molding machine with small ejection force, pneumatic ejection can be used, which is faster than oil pressure ejection. Electric ejection is faster than pneumatic ejection. The mold can be designed to be ejected by the opening action instead of the ejecting device on the injection molding machine.
Top back. Some finished products can be ejected by vibration of injection molding machine. The thimble does not need to be fully withdrawn each time to shorten the time of multiple ejection.
Over JasonMould Industrial Company Limited
Jasonmould is een Chinese matrijzenmaker van plastic mallen- spuitgietmatrijs:, spuitgietmatrijzen, kunststof blaasvormen, rotatiegieten, medisch spuitgieten van kunststof, twee schoten spuitgieten van kunststof, invoegen lijstwerk, overmolding, metalen spuitgieten, micro-spuitgieten, poeder spuitgieten, keramisch spuitgieten, vloeibare spuitgieten, husky spuitgieten, huishoudelijke schimmel, gietvorm, matrijs gereedschap:, aangepaste mallen, Chinese mallen:, tooling voor snelle prototyping, kunststof prototyping gereedschap, ponsmachine tooling, sterven en tooling voor mobiele/mobiele telefoon onderdelen, auto-onderdelen, stofzuigers, oplaadbare gereedschappen, telefoons, kopieerapparaten, computers, multimedia speakers, en vele andere elektronische producten en huishoudelijke apparaten. En ook een fabrikant van plastic producten, schimmelfabrikant China– kunststof onderdelen, plastic watertank, plastic ballen, plastic containers, plastic gesp, plastic anker, plastic hanger, Plastic lepel, plastic pijp montage:, plastic tuimelen, plastic servies, plastic bekers, plastic flessen, plastic dienblad, plastic cosmetische container, plastic verpakking, plastic voedselcontainer, plastic stoelen, plastic doppen, plastic dop sluiting, plastic buizen, kunststof waterleidingen, plastic knoppen, plastic buizen, plastic gebruiksdozen, plastic rekken enzovoort;.
Contact:
Persoon: James Yuan
Bedrijf: JasonMould Industrial Company Limited
Toevoegen: LongGang Village,LongXi Town,BoLuo County,HuiZhou-stad,Provincie GuangDong, China
Tel: 86-752-6682869
E-mail: [email protected]
website: https://www.jasonmolding.com/custom-injection-molding/
