플라스틱 금형, 플라스틱 가공 산업의 플라스틱 성형기와 일치하는, 플라스틱 제품에 완전한 구성 및 정확한 크기 도구 제공. 다양한 성형 방법에 따라, 그것은 금형의 다른 유형으로 나눌 수 있습니다.
금형 제작
- 사출 금형
주로 열가소성 부품 생산에 널리 사용되는 일종의 금형입니다.. 사출 금형의 해당 가공 장비는 사출 성형기입니다.. Plastics are heated and melted in the heating barrel of the bottom of the injection moulding machine, then driven by the screw or plunger of the injection moulding machine, through the injection moulding machine nozzle and the pouring system of the mould, the plastic is cooled and hardened and demoulded. 제품. Its structure usually consists of forming parts, 붓는 시스템, guiding parts, pushing mechanism, 온도 조절 시스템, 배기 시스템, supporting parts and so on. Plastic mould steel is used for manufacturing. Injection moulding process is usually only suitable for the production of thermoplastic products. Plastic products produced by injection moulding process are very extensive. From daily necessities to various complex electrical appliances, automotive parts and other parts are all moulded by injection moulding. It is a widely used processing method in the production of plastic products.
- Blow Mould
A kind of mould used for forming hollow products of plastic containers (음료수 병과 같은, 일일 화학 물질 및 기타 포장 용기). 기술의 원리에 따르면, the form of blow molding mainly includes extrusion blow molding hollow forming, injection blow moulding hollow forming, injection extension blow molding hollow forming (commonly known as injection pull blow), multi-layer blow molding hollow forming. Type, sheet blow moulding, hollow moulding, 기타. The equipment corresponding to blow moulding of hollow products is usually called plastic blow moulding machine. Blow moulding is only suitable for the production of thermoplastic products. The structure of blow moulds is relatively simple, and most of the materials used are made of carbon.
- ExtrusionMould
A kind of mould, also known as extrusion moulding head, is widely used in the processing of pipes, 바, monofilaments, sheets, 영화, wire and cable cladding, profiles and so on. The corresponding production equipment is the plastic extruder. Its principle is that solid plastic melts and plasticizes under the conditions of heating and screw rotating pressure of the extruder. Continuous plastic products with the same cross-section and die shape are made by special shape die. Its main manufacturing materials are carbon structural steel, 합금 도구, 기타. Some extrusion dies will be inlaid with diamond and other wear-resistant materials on parts that need wear-resistant. Extrusion process is usually only suitable for the production of thermoplastic products, which is obviously different from injection and compression moulds in structure.
- Plastic-absorbing mould
A kind of mould for some simple plastic products is made from plastic sheets and sheets. Its principle is to make the plastic sheets and sheets fixed on the concave or punch die deform under the condition of heating and softening and stick them to the cavity of the mould by means of vacuum blooming or compressed air forming. It is mainly used for some daily necessities, food and toy packaging products. In terms of production. Because of the low pressure in the forming process, the suction mold is made of cast aluminium or non-metallic materials, and its structure is relatively simple.
- Compression Mould
It includes compression and injection moulding. They are mainly used to form thermosetting plastic molds, and the corresponding equipment is the pressure moulding machine. According to the characteristics of plastics, the mould is heated to the forming temperature (103 108). Then the measured powder is put into the cavity and charging chamber of the mould, and the mould is closed. Under the action of high heat and high pressure, the plastics are softened and viscous flow. 일정 시간이 지나면, the mould is solidified and shaped to become the required shape of the product. Compression injection molding differs from compression molding in that there is no separate feeding chamber. Before forming, the mould closes first, and the plastic preheates in the feeding chamber in a viscous flow state. Under the action of pressure, it is adjusted to squeeze into the cavity and harden to form. Compression mold is mainly composed of cavity, 먹이는 구멍, 안내 메커니즘, 미는 부분, heating system and so on. Injection moulds are widely used in packaging electrical components. The material used in the manufacture of compression moulds is basically the same as that of injection moulds.
- Mould of Highly Foamed Polystyrene
It is a kind of mold that uses the raw material of EPS (beaded material composed of polystyrene and foaming agent) to form foam plastic packaging materials of various shapes. The principle is that EPS can be steam-formed in the die, including two types of simple manual operation die and hydraulic press through foam plastic mould, which are mainly used to produce packaging products for industrial products. The materials for making this kind of mould are cast aluminium, 스테인레스 스틸, 브론즈 등등.
JasonMould 산업 회사 제한, 설립 2010, 선두이다 중국 금형 공장. JasonMould는 가전 제품을위한 플라스틱 금형 생산을 전문으로합니다., 의료 장비, 전자 장비, 안전 장비 및 모니터링 시스템.
그만큼 회사 끝났다 15000 평방 미터 공장. 다양한 기계 및 전문 지식을 보유한 플라스틱 사출 공구 부문, JasonMould는 작고 정밀한 휴대폰 부품에서 자동차 부품만큼 큰 도구를 제공합니다.. 우리의 도구는 주로 미국으로 수출됩니다., 유럽, 일본과 영국. JasonMould의 다각화 전략과 풀 서비스는 전 세계 고객들로부터 찬사를 받았습니다..
우리의 임무는 고객에게 고품질의 성형 제품과 서비스를 제공하는 것입니다.. 우리는 가격에 대한 고객의 기대치를 초과하는 것을 목표로합니다., 품질 및 정시 납품. 우리의 사명을 달성하기 위해, JasonMould:
- 직원의 기술과 효율성을 지속적으로 개선하기 위해 노력합니다.,
- 직원들에게 깨끗하고 안전한 작업 환경을 제공합니다.,
- 엄격한 유지 보수 프로그램을 통해 기계 기술 및 지원 장비를 업그레이드합니다., 과
- 고객의 툴링을 최고 성능으로 유지
에 대해 더 알아보기 중국 사출 성형 비용,방문하시기 바랍니다 https://www.jasonmolding.com/
문의처:
담당자: 제임스 위안
회사 이름: JasonMould 산업 회사 제한
주소: 롱강 빌리지,LongXi 타운,BoLuo 카운티,혜주시,광동성, 중국
전화: 86-752-6682869
이메일: [email protected]
