플라스틱은 오늘날 대부분의 응용 분야에서 사용되는 가장 다재다능한 재료입니다.. 이 소재의 광범위한 사용은 대부분의 산업 세계에서 큰 영향을 미쳤습니다.. 오늘날 플라스틱 제품을 만드는 프로세스 중 하나는 플라스틱 사출 성형이라고 합니다..
플라스틱 사출 성형 is a process that has been rapidly growing and which has brought in more momentum within a short range of time. 플라스틱 성형 사출 공정은 많은 이점을 제공합니다.. The most important advantage is that it is cost-effective and is very steadfast. 게다가, this procedure delivers finished products that are smooth and do no require extra finishing. The injection molding machines are the equipments concerned in plastic injection molding that are actually very complicated and expensive.
The equipments that are being utilized in the process are also heavy that there are others which weigh up to even tons of kilogram. But with the use of these machines, the end product result to having a high quality. This is for the reason that the plastic molds are put into these equipments then they are exposed to high temperature until they turn into fluid. This means that the machinery should put up with up high temperature and thereby comes up to the prerequisite of complicated equipments.
When the plastic is injected into the mold or the cavity through gates, it takes the particular shape of the mold, after the plastic is cooled down in the mold, it is ejected out of the mold. These cavities can be utilized for getting desired plastic into almost any shape. There are of course cost considerations when designing plastic and experienced engineers will understand the cost trade-off of different design features. There are two components of the mold, which are injection and ejector mold. The liquefied plastic resin is put into the mold for getting set into the shape and the plastic part is ejected through the ejector mold once it is solidified. There is no damage caused to the product and it is ejected safely with the help of ejecting pins.
Next procedure includes the application of mechanical or the hydraulic pressure, when the air is trapped in the mold and needs to get released. The process is called as Dwelling process. The air is released as the cavities filled with air are pushed aside in the corner due to the pressure application. Afterwards the liquid gets solidified thereby cooling down the mold. In the end the solidified plastic is brought out of the mold which could be done either in an automatic or manual way.
There occurs a significant change in the physical and chemical properties of the plastic product thus formed after the cooling process. The most prominent feature of this process of Plastic Injection Molding is the mold width. 일반적으로, a mold with the uniformly thick walls is preferred as it decreases the changes brought about in the mechanical properties of the plastic product.
에 대한 JasonMould 산업 회사 제한
JasonMould is a manufacturer of plastic molds- 사출 금형, 다이 캐스팅 금형, 플라스틱 블로우 성형, 회전 성형, 의료 플라스틱 사출 성형, 투샷 플라스틱 사출 성형, 인서트 몰딩, 오버 몰딩, 금속 사출 성형, 마이크로 사출 성형, 분말 사출 성형, 세라믹 사출 성형, 액체 사출 성형, 허스키 사출 성형, 가정용 곰팡이, 주조 금형, 금형 도구 다이, 맞춤 금형, 중국 금형, 신속한 프로토 타이핑 도구, 플라스틱 프로토 타이핑 툴링, 펀치 프레스 툴링, 모바일 / 휴대폰 부품 용 다이 및 툴링, 자동차 부품, 진공 청소기, 충전식 도구, 전화기, 복사기, 컴퓨터, 멀티미디어 스피커, 및 기타 많은 전자 제품 및 가전 제품. 또한 플라스틱 제품 제조업체- 플라스틱 부품, 플라스틱 물 탱크, 플라스틱 공, 플라스틱 용기, 플라스틱 버클, 플라스틱 앵커, 플라스틱 걸이, 플라스틱 숟가락, 플라스틱 파이프 피팅, 플라스틱 텀블, 플라스틱 식기, 플라스틱 컵들, 플라스틱 병, 플라스틱 쟁반, 플라스틱 화장품 용기, 플라스틱 케이스, 플라스틱 식품 용기, 플라스틱 의자, 플라스틱 캡, 플라스틱 캡 폐쇄, 플라스틱 튜브, 플라스틱 수도관, 플라스틱 손잡이, 플라스틱 튜브, 플라스틱 유틸리티 박스, 플라스틱 선반 등.
접촉:
사람: 제임스 위안
회사: JasonMould 산업 회사 제한
더하다: 롱강 빌리지,LongXi 타운,BoLuo 카운티,혜주시,광동성, 중국
Tel: 86-752-6682869
이메일: [email protected]
대지 :https://www.jasonmolding.com
