1、 목적
공정 품질 관리 강화, 제품 품질을 향상시키다, 생산 효율을 향상, 재작업 횟수를 효과적으로 제어, 운영자의 자체 검사를 감독합니다..
2、 적용 범위
모든 사출 작업장 작업자.
3、 콘텐츠
1. 연속 생산 전, 작업자는 확인을 위해 첫 번째 품질 검사를 보내야 합니다., 첫 번째 조각은 자격을 갖추고 봉인된 후에만 생산할 수 있습니다.. 봉인된 샘플의 라벨에는 제품 번호가 있어야 합니다., 이름, sample sealing person and sample sealing time, otherwise the products produced will be regarded as defective products.
2. The first product produced after color change, mold change, material change and mold repair can only be mass produced after passing the self inspection and sending it to the quality inspection for confirmation and sample sealing.
3. The products produced by each shift shall be self checked against the sealed samples and injection molding operation instructions. Before taking over the shift, check whether the plan card and the products, materials and colors after mold change are corresponding; Whether the sealing samples and injection molding operation instructions are in place. When taking over the shift, the products must undergo self inspection and initial inspection, and be inspected item by item according to the sealed samples, injection molding operation instructions and relevant quality documents. After confirmation, the products can be produced after taking over the shift.
4. Each shift shall carry out comprehensive self inspection as required, and complete the final product inspection before leaving work. If the final product inspection does not meet the quality requirements, all products of the shift shall be re inspected immediately.
5. If the product does not meet the quality requirements, the technician or the supervisor on duty shall be notified in time for adjustment. The product can be produced only after the product meets the quality requirements and is sent to the quality inspection for confirmation.
6. If you don’t know or know the product quality problem or can’t make accurate judgment, you should send the product to the quality inspector for confirmation and judgment, and know the product quality from the quality inspector.
7. Self checking method
8. Reworked products
The reworked products must be reworked by the operator, and no salary shall be paid during the rework period. For nonconforming products, the quality inspector shall issue a nonconforming product disposal form and directly submit it to the shift supervisor for signature. Reworked products can be warehoused only after they are confirmed to be qualified by quality inspection. The shift supervisor shall carefully implement the reworked products, and teach the operators to prevent the recurrence of similar problems according to the unqualified items determined by the quality inspection.
9. Nonconforming products
NS. The operator must report the non-conforming products produced in the production process to the supervisor on duty for treatment, and record the number of non-conforming products in the daily production report of the injection molding workshop. NS. The shift supervisor shall analyze the causes of products with high defect rate.
씨. The unqualified products produced by the operator can be crushed after being confirmed by the shift supervisor and the quality inspector.
NS. The shift supervisor shall collect the daily inspection record form of injection molding workshop for each machine every day to the workshop supervisor for review, and track, verify and handle the abnormalities.
이자형. Supervise and urge operators to report non-conforming products, and the shift supervisor to handle them after reporting. The workshop controls the rate of defective products.
사출 금형의 구조에서주의해야 할 세 가지 점은 전체 금형 배아와 금형 코어의 조정입니다., 주식회사
디제이 몰드는 중국 금형 제작자 플라스틱 금형- 사출 금형, 다이 캐스팅 금형, 플라스틱 블로우 성형, 회전 성형, 의료 플라스틱 사출 성형, 투샷 플라스틱 사출 성형, 인서트 몰딩, 오버 몰딩, 금속 사출 성형, 마이크로 사출 성형, 분말 사출 성형, 세라믹 사출 성형, 액체 사출 성형, 허스키 사출 성형, 가정용 곰팡이, 주조 금형, 금형 도구 다이, 맞춤 금형, 중국 금형, 신속한 프로토 타이핑 도구, 플라스틱 프로토 타이핑 툴링, 펀치 프레스 툴링, 모바일 / 휴대폰 부품 용 다이 및 툴링, 자동차 부품, 진공 청소기, 충전식 도구, 전화기, 복사기, 컴퓨터, 멀티미디어 스피커, 및 기타 많은 전자 제품 및 가전 제품. 또한 플라스틱 제품 제조업체, 금형 제조업체 중국– 플라스틱 부품, 플라스틱 물 탱크, 플라스틱 공, 플라스틱 용기, 플라스틱 버클, 플라스틱 앵커, 플라스틱 걸이, 플라스틱 숟가락, 플라스틱 파이프 피팅, 플라스틱 텀블, 플라스틱 식기, 플라스틱 컵들, 플라스틱 병, 플라스틱 쟁반, 플라스틱 화장품 용기, 플라스틱 케이스, 플라스틱 식품 용기, 플라스틱 의자, 플라스틱 캡, 플라스틱 캡 폐쇄, 플라스틱 튜브, 플라스틱 수도관, 플라스틱 손잡이, 플라스틱 튜브, 플라스틱 유틸리티 박스, 플라스틱 선반 등.
접촉:
사람: 제임스 위안
회사: 사출 금형의 구조에서주의해야 할 세 가지 점은 전체 금형 배아와 금형 코어의 조정입니다.
더하다: 롱강 빌리지,LongXi 타운,BoLuo 카운티,혜주시,광동성, 중국
Tel: 86-752-6682869
이메일: [email protected]
대지: https://www.jasonmolding.com/custom-injection-molding/
