사출 성형 프로젝트에 적합한 플라스틱 재료를 선택할 때 고려해야 할 사항이 많이 있습니다.. 다른 플라스틱 수지와 재료는 다른 특성을 가지고 있기 때문에, 이러한 특성은 제품의 성능에 영향을 미칠 수 있습니다..
The question to be understood when evaluating the product for the first time is: what is the purpose of the injection molding product? Where will it be used and how it will work? Because of the different uses of the product, the occasions used can affect the important performance of the product.
Before choosing which plastic resin is suitable for your injection molding project, there are some considerations. There are a wide variety of plastic resins, including additives, commercial resins and engineering resins that may help you meet your specific needs. From very common ABS plastics to TPE, there are many materials to choose from.
What factors should be considered when choosing the plastic material suitable for your injection molding project?
1) Will your plastic products be affected by temperature changes?
Temperature changes can affect your choice of resin for many reasons, which largely depends on the environment in which the part is used and its purpose. 예를 들면, if the product is to be used outdoors, it may need to be able to withstand high and low temperatures without compromising its integrity.
2) Is your plastic product disposable or long-term use?
Another factor to consider when selecting materials is the service life of the product. If parts are to be operated in a mechanical environment (e.g., medical grade equipment), it is important to ensure that the durability of the material matches the purpose of the product. 하나, if the product is used for packaging (예를 들어. disposable water bottles or the outer shell of consumer goods), the product life does not need to be considered.
3) Are your plastic parts more functional or aesthetic, such as high gloss?
When considering color and plastic choices, an important consideration is: what is the use of the product? 일부 경우에, parts for larger mechanisms may not require multiple colors. In these cases, other factors such as strength, durability and cost may have a greater impact on your decision than the color performance of the plastic.
4) Does the product need to be made of flexible or harder plastics?
Flexible plastics and rigid requirements are also important factors to consider when selecting plastics for the project. This requirement is usually considered in combination with the strength of the product.
5) Are plastic parts required to withstand specific mechanical or physical loads?
It is important to check the properties of the resin. Some plastics have better mechanical or physical loading properties than others, and in some cases, additives can be used to meet load or strength requirements.
JasonMould Industrial Company Limited 정보
Jasonmould는 중국 금형 제작자 플라스틱 금형- 사출 금형, 다이 캐스팅 금형, 플라스틱 블로우 성형, 회전 성형, 의료 플라스틱 사출 성형, 투샷 플라스틱 사출 성형, 인서트 몰딩, 오버 몰딩, 금속 사출 성형, 마이크로 사출 성형, 분말 사출 성형, 세라믹 사출 성형, 액체 사출 성형, 허스키 사출 성형, 가정용 곰팡이, 주조 금형, 금형 도구 다이, 맞춤 금형, 중국 금형, 신속한 프로토 타이핑 도구, 플라스틱 프로토 타이핑 툴링, 펀치 프레스 툴링, 모바일 / 휴대폰 부품 용 다이 및 툴링, 자동차 부품, 진공 청소기, 충전식 도구, 전화기, 복사기, 컴퓨터, 멀티미디어 스피커, 및 기타 많은 전자 제품 및 가전 제품. 또한 플라스틱 제품 제조업체, 금형 제조업체 중국– 플라스틱 부품, 플라스틱 물 탱크, 플라스틱 공, 플라스틱 용기, 플라스틱 버클, 플라스틱 앵커, 플라스틱 걸이, 플라스틱 숟가락, 플라스틱 파이프 피팅, 플라스틱 텀블, 플라스틱 식기, 플라스틱 컵들, 플라스틱 병, 플라스틱 쟁반, 플라스틱 화장품 용기, 플라스틱 케이스, 플라스틱 식품 용기, 플라스틱 의자, 플라스틱 캡, 플라스틱 캡 폐쇄, 플라스틱 튜브, 플라스틱 수도관, 플라스틱 손잡이, 플라스틱 튜브, 플라스틱 유틸리티 박스, 플라스틱 선반 등.
접촉:
사람: 제임스 위안
회사: JasonMould 산업 회사 제한
더하다: 롱강 빌리지,LongXi 타운,BoLuo 카운티,혜주시,광동성, 중국
Tel: 86-752-6682869
이메일: [email protected]
