射出成形プロセスは通常、 6 ステップ:
- クランプ: 射出成形機には 3 部品–射出成形金型, クランプとインジェクションユニット, その中で, 型締ユニットは金型を特定の圧力に保ちます, so as to ensure the consistency of the outputs.
A mold is usually made up of 2 部品.
- The injection unit: It refers to the part where the plastic pellets are fed into the hopper located at the top end of the injection unit. These pellets will be loaded into the main cylinder, where they are heated at a high temperature until they are melted into liquids. それで, inside the injection unit, a screw will turn and mix the already liquefied plastic. Once this liquid plastic has reached the ideal condition for the product, the injection process will start. The plastic liquid is forced through a running gate, of which the speed and pressure are controlled by a screw or sometimes a ram dependingon what kind of machine you are using.
- The dwelling: It represents a pause in the process when certain pressure is applied to guarantee that each of the mold cavities has been filled thoroughly. It is such an important step within the process that if the mold cavities are not filled properly, it will lead to scrap of the units.
- 金型には適度な収縮率が必要です: This process step allows the mold to cool off for a required period of time. If this step is performed too hastily, the units will probably stick together or get deformed when it is taken out of the machine.
- Mold opens: The clamping unit will open to separate the mold. The molds which are often the most important individual part during the entire process are used over and over again, and the tooling of them can be very costly.
- The ejection: The finished product is ejected from the injection mold machine in the end. 一般的に言えば, a finished product will continue to be on a production line or be packed and delivered to a production line as a component of a larger product, 例えば. the steering wheel of a car.
日常生活の中で, the products that involve the application of injection molding are used every day by each of us. If it were not for injection molding, many cars would not be sold at such an affordable price. しかしながら, this process also has some disadvantages. The machines are very costly and therefore involves a lot of capital investment. When designing the parts, we must keep the production process in mind, because the process is not deemed economical for short-run productions.
金型製作
Nevertheless, the disadvantages are outweighed by the greater benefits, which include the speed at which the parts are produced, the relatively low labor costs and minimal material waste. 平, the finished parts usually require no more finishing.
If you are interested in our service or in need of any technical support, please feel free to let us know. We would be happy to share what we know about plastic injection molding with you and provide the exact economical plastic injection molding solution you are looking for.
About JasonMould Industrial Company：
ザ・ 会社 終わった 15000 平方メートル工場. 異なる機械と専門知識を持つプラスチック射出成形部門と, JasonMould は、小型で精密な携帯電話部品から自動車部品と同じくらい大きな部品まで、ツールを提供しています。. 当社の工具は主に米国に輸出されています。, ヨーロッパ, 日本と英国. JasonMould の多角化戦略とフルサービスは、世界中の顧客から称賛を集めています。.
私たちの使命は、お客様に高品質の成形製品とサービスを提供することです. お客様の価格に対する期待を超えることを目指しています, 品質と納期厳守. 私たちの使命を達成するために, ジェイソンモールド:
- 従業員のスキルと効率を継続的に改善することを約束します,
- 従業員に清潔で安全な作業環境を提供します,
- 厳格なメンテナンスプログラムにより、機械技術とサポート機器をアップグレードします, そして
- お客様のツールを最高のパフォーマンスに維持します
詳細については 中国射出成形コスト,来てください https://www.jasonmolding.com/
お問い合わせ先:
連絡窓口: ジェームズ・ユアン
会社名: JasonMould Industrial Company Limited
住所: 竜崗村,Long西町,博羅県,恵州市,広東省, 中国
電話: 86-752-6682869
Eメール: [email protected]
Webサイト: https://www.jasonmolding.com
