- 편면 사출 금형을 열었을 때, 움직이는 다이와 고정 다이가 분리되어 있습니다., 그리고 플라스틱 부품을 꺼냅니다., 단일 이형면 금형 및 이중 판 금형이라고하는. 사출금형의 가장 단순하고 기본적인 형태입니다.. 필요에 따라 단일 캐비티 사출 금형 또는 다중 캐비티 사출 금형으로 설계할 수 있습니다.. 가장 널리 사용되는 사출 금형입니다..
- The double parting surface injection mould has two parting surfaces. Compared with the single parting surface injection mould, the double parting surface injection mould adds a movable middle plate (also called movable gate board) in the fixed part of the mould. It has a gate, 달리는 사람, and other parts and components needed for a fixed mold, so it is also called a three-plate injection mould (moving template, middle plate, fixed template). It is often used for injection molds with single or multiple cavities that point gate feed, when opening a mold, The intermediate plate is separated from the fixed template at a fixed distance on the guide column of the die to remove the castable system between the two templates. The injection mould with double parting surface is complex in structure, high in manufacturing cost and difficult in parts processing, so it is not generally used in the molding of large or super large plastic products.
- Injection molds with lateral parting and core-pulling mechanism. When plastic parts have side holes or side recesses, lateral moving cores or sliders should be used. After injection molding, the dynamic die moves a distance down first, then the inclined section of the bending pin fixed on the fixed template forces the slider to move outwards. 동시에, the push rod of the demoulding mechanism pushes the push plate to make the plastic part take off from the core.
- Because of some special structure of plastic parts, injection molds with movable forming parts require movable molding parts, such as movable punch, movable concave die, movable insert, movable thread core or ring, 기타. During demoulding, you can move out of the mold together with the plastic parts, and then separate from the plastic parts.
- For plastic parts with screw threads, the injection mould can be automatically unthreaded by setting a thread core or ring that can be rotated on the mould, using the opening action or the rotating mechanism of the injection molding machine, or setting up a special transmission device. Drive screw thread core or thread ring rotation, so as to remove plastic parts.
- The injection mould without runner is the method of adiabatic heating of the runner, which keeps the plastic melt from the one cavity of the nozzle of the injection molding machine, and makes the mold take out the plastic parts without the pouring system solidification. The former is called adiabatic injection mold, the latter is called hot runner injection mold.
- The right angle injection mould is only suitable for the angular injection molding machine, which is different from other injection molds in that the feeding direction of the mould is perpendicular to the opening and closing direction of the mould. His main channel is set on both sides of the moving, fixed parting surface, and its cross section is usually the same, which is different from the mold used in other injection molding machines, the end of the main channel. In order to prevent the abrasion and deformation of the nozzle and the main inlet of the injection molding machine, replaceable runner inserts can be set up.
- 대부분의 사출 금형에서, the demoulding device is installed on the side of the moving mold, which is advantageous to the work of ejection device in the opening and closing system of the injection molding machine. In actual production, because some plastic parts are limited by the shape, it is better to leave the plastic parts on the one side of the fixed mold, so that the plastic parts can be removed from the mold, so the demoulding mechanism must be set on the side of the fixed mold.
Jasonmould는 플라스틱 금형 제조업체입니다.- 사출 금형, 다이 캐스팅 금형, 플라스틱 블로우 성형, 회전 성형, 의료 플라스틱 사출 성형, 투샷 플라스틱 사출 성형, 인서트 몰딩, 오버 몰딩, 금속 사출 성형, 마이크로 사출 성형, 분말 사출 성형, 세라믹 사출 성형, 액체 사출 성형, 허스키 사출 성형, 가정용 곰팡이, 주조 금형, 금형 도구 다이, 맞춤 금형, 중국 금형, 신속한 프로토 타이핑 도구, 플라스틱 프로토 타이핑 툴링, 펀치 프레스 툴링, 모바일 / 휴대폰 부품 용 다이 및 툴링, 자동차 부품, 진공 청소기, 충전식 도구, 전화기, 복사기, 컴퓨터, 멀티미디어 스피커, 및 기타 많은 전자 제품 및 가전 제품. 또한 플라스틱 제품 제조업체- 플라스틱 부품, 플라스틱 물 탱크, 플라스틱 공, 플라스틱 용기, 플라스틱 버클, 플라스틱 앵커, 플라스틱 걸이, 플라스틱 숟가락, 플라스틱 파이프 피팅, 플라스틱 텀블, 플라스틱 식기, 플라스틱 컵들, 플라스틱 병, 플라스틱 쟁반, 플라스틱 화장품 용기, 플라스틱 케이스, 플라스틱 식품 용기, 플라스틱 의자, 플라스틱 캡, 플라스틱 캡 폐쇄, 플라스틱 튜브, 플라스틱 수도관, 플라스틱 손잡이, 플라스틱 튜브, 플라스틱 유틸리티 박스, 플라스틱 선반 등.접촉:
담당자: 제임스 위안
회사 이름: JasonMould 산업 회사 제한
주소: 롱강 빌리지,LongXi 타운,BoLuo 카운티,혜주시,광동성, 중국
전화: 86-752-6682869
이메일: [email protected]
웹사이트: https://www.jasonmolding.com
18
4 월
