Common failure of injection mold

1.1 Mold reset plate is not reset

After the mold is opened, the mold reset plate is not reset. The causes are: reset oil cylinder oil leakage, resulting in uneven force when the mold is reset. The mold reset is unbalanced.
The reset rod of the mold is strained, the cooperation between the reset rod and the guide sleeve is tightened, and the reset plate is not topped.

Solution: Check if the oil seal of the mold reset cylinder is worn out. If it is worn out, replace the oil seal in time. Check if the mold reset lever is strained, Polishing mould reset rod and lubrication.

 

1.2 Mold feed nozzle blocking material

When the injection mold is opened, the product head breaks and is blocked in the mold feed nozzle, which causes the product to be unsatisfactory when the mold is injected.

Cause: The hot runner temperature of the mold does not reach the melting point of the raw material, the mold gate sleeve has burrs, and the improper adjustment of the injection molding process is caused.

Solution: Adjust the process according to the requirements of the injection molding process, and check whether the mold sprue sleeve has burrs.

 

1.3 Mold core slider does not reset
The mold slider is not reset, causing the product to crack.

Cause: The mold slider is tight, and the mold slider return spring is invalid.

Solution: Repair the mold slider and replace the reset spring.

 

About JasonMould Industrial Company Limited

Jasonmould is a China mold maker of plastic molds- injection mold, die casting moulds, plastic blow molding, rotational molding, medical plastic injection molding, two shot plastic injection molding, insert molding, overmolding, metal injection molding, micro injection molding, powder injection molding, ceramic injection molding, liquid injection molding, husky injection molding, household mold, casting mold, die mold tool, custom molds, china moulds, rapid prototyping tooling, plastic prototyping tooling, punch press tooling, die and tooling for mobile/ cell phone parts, automotive parts, vacuum cleaners, rechargeable tools, telephones, copiers, computers, multimedia speakers, and many other electronic products and household appliances. And also a plastic product manufacturer, mold manufacturer China– plastic parts, plastic water tank, plastic balls, plastic containers, plastic buckle, plastic anchor, plastic hanger, plastic spoon, plastic pipe fitting, plastic tumble, plastic tableware, plastic cups, plastic bottles, plastic tray, plastic cosmetic container, plastic case, plastic food container, plastic chairs, plastic caps, plastic cap closure, plastic tubes, plastic water pipes, plastic knobs, plastic tubing, plastic utility boxes, plastic racks and so on.

Contact:
Person: James Yuan
Company: JasonMould Industrial Company Limited
Add:  LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong Province, China
Tel: 86-752-6682869
Email: [email protected]

Site: https://www.jasonmolding.com/company/

Share this post